VA WTB 69-71 blazer filler neck and tank - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**19702wdc10** · 03-08-2014, 02:20 PM

I am looking to put a second tank in my 1970 c10 using 1969 to 1971 blazer parts.
Please send info on any of the parts you have to sell.
Thanks
Joe

**NGN** · 03-08-2014, 02:29 PM

Is the 1972 diffrent then. 69 - 71 and is there a diffrence with 2 wheel or 4 wheel drive.

**19702wdc10** · 03-08-2014, 03:39 PM

The 1972 has a solid steel filler neck all the way to tank, the others have a fill neck then a hose section and then steel below the bed towards tank. The gas cap is also a different size.

I am not sure if there is a difference between 2WD and 4 WD

Thanks
Joe

Jake1971 · 03-08-2014, 03:53 PM

Borrowed from other threads: Name: 1972 Blazer filler neck.jpeg
Views: 1866
Size: 54.4 KB

Name: filler neck.jpg
Views: 1862
Size: 75.5 KB

These are from 1972 Blazers. Hope this helps.
Also available from another member are some nice kits at http://gmcpauls.com/fuel_tank_&_related.htm

**19702wdc10** · 03-08-2014, 10:01 PM

Thanks for the pictures.

Is the pipe next to the fill neck in the blazer picture part of the fuel system?

Joe

ABNGRNT13 · 03-09-2014, 12:55 AM

Vent tube

**19702wdc10** · 03-09-2014, 01:57 AM

Thank you

superlifted · 03-10-2014, 10:31 PM

I have a tank shipped from nm its a poly tank

**19702wdc10** · 03-10-2014, 10:39 PM

Thank you but I a looking for a metal tank.

Do you have any other Blazer fuel pieces like fill neck or lower filler pipe?

Joe

**1rippen6** · 03-11-2014, 08:59 PM

I have a 71 setup with filler tube, bottom elbow, gasket w/ plate, and cover. I sandblasted the bottom elbow because it was pretty rusty and blew a hole thru it. I had a guy at work tig weld it with what he called silicone bronze wire and pressure tested it to 15 psi. I have a photo of the repair. The cover has the one corner rusted off I included a picture of the other side to compare. 100 shipped for everything. I have a tank also w/ sending unit that was on my blazer when I 4wheeled it so it has dents in the bottom but no holes. Let me know if interested and I will figure out a price. Sending unit worked when I pulled it out but that was 6 + years ago and two moves.

**1rippen6** · 03-11-2014, 09:48 PM

I have straps will they work for what you are doing? 100 dollars for the tank that will be 200 for everything plus shipping.

**19702wdc10** · 03-11-2014, 10:09 PM

The factory tank is supposed to fit with the factory straps
is it possible to send picture
Thanks
Joe

**1rippen6** · 03-11-2014, 10:10 PM

Yep will send tomorrow

**19702wdc10** · 03-11-2014, 10:17 PM

Do have vent tube?

**1rippen6** · 03-11-2014, 10:32 PM

Sorry forgot to respond the first time you asked unfortunately I do not. I do not even have one for my build.

**1rippen6** · 03-11-2014, 10:35 PM

I may have a friend that has one I will ask him tomorrow

**1rippen6** · 03-12-2014, 06:59 PM

My friend does not have a vent tube attached pics of the gas tank, straps, and spacer between the tank and frame(I am guessing you will need this). Something else I could probably meet you in Winchester if that would work for you

**1rippen6** · 03-12-2014, 09:37 PM

Vent tube for sale

http://67-72chevytrucks.com/vboard/s...d.php?t=618729

**19702wdc10** · 03-13-2014, 11:20 AM

Winchester will work great
how is the filler neck on the tank, any damage?

**1rippen6** · 03-13-2014, 12:00 PM

No i can get better pictures if you like the edge might have a ding in it but nothing major. If you want to meet in Winchester I have a second tank I will bring them both and you can have you pick same condition. PM sent

03-08-2014, 02:20 PM	#1
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	WTB 69-71 blazer filler neck and tank I am looking to put a second tank in my 1970 c10 using 1969 to 1971 blazer parts. Please send info on any of the parts you have to sell. Thanks Joe

03-08-2014, 02:29 PM	#2
NGN Registered User Join Date: Nov 2001 Location: Old Bridge,NJ Posts: 838	Re: WTB 69-71 blazer filler neck and tank Is the 1972 diffrent then. 69 - 71 and is there a diffrence with 2 wheel or 4 wheel drive.

03-08-2014, 03:39 PM	#3
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank The 1972 has a solid steel filler neck all the way to tank, the others have a fill neck then a hose section and then steel below the bed towards tank. The gas cap is also a different size. I am not sure if there is a difference between 2WD and 4 WD Thanks Joe

03-08-2014, 03:53 PM	#4
Jake1971 Registered User Join Date: Oct 2013 Location: Bonnerdale, AR Posts: 699	Re: WTB 69-71 blazer filler neck and tank Borrowed from other threads: These are from 1972 Blazers. Hope this helps. Also available from another member are some nice kits at http://gmcpauls.com/fuel_tank_&_related.htm __________________ 1971 Bone Stock C10 project "Jake" 1997 Sierra SLT factory short bed "Silver Bullet" Last edited by Jake1971; 03-08-2014 at 03:59 PM.

03-08-2014, 10:01 PM	#5
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thanks for the pictures. Is the pipe next to the fill neck in the blazer picture part of the fuel system? Joe

03-09-2014, 12:55 AM	#6
ABNGRNT13 Registered User Join Date: Dec 2013 Location: Fort Mitchell, AL (out the back gate of Ft Benning) Posts: 140	Re: WTB 69-71 blazer filler neck and tank Vent tube __________________ SSG Walker Harris '72 Cheyenne Longbed '66 Panel '66 Short Stepside '65 Short Fleetside

03-09-2014, 01:57 AM	#7
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thank you

03-10-2014, 10:31 PM	#8
superlifted Registered User Join Date: Nov 2009 Location: farmington nm Posts: 178	Re: WTB 69-71 blazer filler neck and tank I have a tank shipped from nm its a poly tank

03-10-2014, 10:39 PM	#9
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Thank you but I a looking for a metal tank. Do you have any other Blazer fuel pieces like fill neck or lower filler pipe? Joe

03-11-2014, 08:59 PM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank I have a 71 setup with filler tube, bottom elbow, gasket w/ plate, and cover. I sandblasted the bottom elbow because it was pretty rusty and blew a hole thru it. I had a guy at work tig weld it with what he called silicone bronze wire and pressure tested it to 15 psi. I have a photo of the repair. The cover has the one corner rusted off I included a picture of the other side to compare. 100 shipped for everything. I have a tank also w/ sending unit that was on my blazer when I 4wheeled it so it has dents in the bottom but no holes. Let me know if interested and I will figure out a price. Sending unit worked when I pulled it out but that was 6 + years ago and two moves.

03-11-2014, 09:48 PM	#11
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank I have straps will they work for what you are doing? 100 dollars for the tank that will be 200 for everything plus shipping.

03-11-2014, 10:09 PM	#12
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank The factory tank is supposed to fit with the factory straps is it possible to send picture Thanks Joe

03-11-2014, 10:10 PM	#13
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank Yep will send tomorrow

03-11-2014, 10:17 PM	#14
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Do have vent tube?

03-11-2014, 10:32 PM	#15
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank Sorry forgot to respond the first time you asked unfortunately I do not. I do not even have one for my build.



Register or Log In To remove these advertisements.

03-11-2014, 10:35 PM	#16
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank I may have a friend that has one I will ask him tomorrow

03-12-2014, 06:59 PM	#17
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank My friend does not have a vent tube attached pics of the gas tank, straps, and spacer between the tank and frame(I am guessing you will need this). Something else I could probably meet you in Winchester if that would work for you Attached Images

03-12-2014, 09:37 PM	#18
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank Vent tube for sale http://67-72chevytrucks.com/vboard/s...d.php?t=618729

03-13-2014, 11:20 AM	#19
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: WTB 69-71 blazer filler neck and tank Winchester will work great how is the filler neck on the tank, any damage?

03-13-2014, 12:00 PM	#20
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,799	Re: WTB 69-71 blazer filler neck and tank No i can get better pictures if you like the edge might have a ding in it but nothing major. If you want to meet in Winchester I have a second tank I will bring them both and you can have you pick same condition. PM sent

Register or Log In To remove these advertisements.