Greetings from Atlanta - The 1947 - Present Chevrolet & GMC Truck Message Board Network

steved033 · 03-31-2014, 09:22 AM

Hey everyone,

I just joined up because I've had a '66 fleetside longbed for a couple months now.

The truck was a light blue 250/3 on the tree that became dark green, that became flat black, and a 3 on the floor conversion. I've been going through things and making them better. The dash was a non-gauge, and most of the bulbs were burned out (that's another thread, as I put aftermarket 2" gauges behind the glass), the wiring was a disaster, the fuse block had bits of copper pipe instead of fuses, extra wires were run around inside, there's no turnsignals, and it runs hot. I thought the hot running was the thermostat, but that doesn't seem to be the case.

Plans are to build something custom, 5.3 swap, auto, airbags....

anyway, thought i'd say hi!

Steve

flashed · 03-31-2014, 09:48 AM

Welcome from Canton ,check out the n Ga section .

steved033 · 03-31-2014, 11:18 AM

awesome...did.

sjd

Mathew21 · 03-31-2014, 01:10 PM

Welcome, Post some pictures when you get a chance.

MikeS. · 03-31-2014, 01:17 PM

Yep we need pics, lots of pics. Ohh and Welcome!

steved033 · 03-31-2014, 01:41 PM

Here's one from the day I got it. I traded a 1968 Plymouth Fury Convertible for it--even trade....not sure who got the better deal, but man, it's easier to find parts for this thing. I included a pic of the Fury, too. I had no room inside for it, and it had no roof...

The truck is solid. Someone welded a piece of diamond plate in the bed, and it's not fastened down in the corner that looks saggy in the picture. the frame is straight and solid.

The chevy is cool, I don't think the water pump is pumping...that'll be this coming weekend's project. It'll pass 230 degrees, there's a new thermostat, and there's a weird rattle that isn't pushrods or bottom end near the fan... I have a new pump and radiator...we'll see.

sjd

TJ's Chevy · 03-31-2014, 01:48 PM

Nice looking truck! Does sound like you have a water flow issue. Hope yer able to easily fix it. And welcome from Oregon! T.J.

Old Bleu · 03-31-2014, 04:26 PM

Hi Steve, I'm out beyond Loganville. I've only had my '64 since last May, but if you need any help, don't hesitate to ask. This folks on this forum can answer any truck questions that you have for sure.

Jeff La · 03-31-2014, 11:34 PM

Welcome to the forum and nice vehicles.

**Captainfab** · 04-01-2014, 12:22 AM

Welcome to the forum Steve

steved033 · 04-01-2014, 07:57 AM

Quote:

Originally Posted by Jeff La

Welcome to the forum and nice vehicles.

Thanks for all the welcomes, everyone!

I'm a car guy (i'm bad at sports) the fleet also includes a Datsun 240z, an Austin Healey, and a 1971 Plymouth GTX. I'm a year away from 40, i'm pretty good with carburetors (esp. SU's), I found my niche and I'm enjoying every minute of it.

sjd

1963c-10 · 04-01-2014, 08:39 AM

Welcome and great looking project. Had a buddy growing up who was big into GTX's...spent quite a few nights cruising the blvd in them.

flashed · 04-01-2014, 09:39 AM

Show us pics of your other toys too ,especially the GTX .

steved033 · 04-01-2014, 09:49 AM

Quote:

Originally Posted by flashed

Show us pics of your other toys too ,especially the GTX .

okay... BMW, 240z, and GTX...ford focus commuter in the background

Jeff La · 04-01-2014, 10:16 AM

Allright don't be stingy where's the austin LOL

steved033 · 04-01-2014, 10:50 AM

Quote:

Originally Posted by Jeff La

Allright don't be stingy where's the austin LOL

JEEEZ!!!! LOL. I found it in a carport in Atlanta. it had sat there since 1968. I had it running in 20 minutes, it's run pretty much perfectly since then. 49k miles.

I've got the knack to hunt barn find cars...I just don't have the capital or space to buy them all.... I've passed on several '78 T/A's (I want a solar gold SE or Martinique Blue so bad!!!), chargers, alfas, man...the stories...

sjd

Jeff La · 04-01-2014, 11:12 PM

Quote:

Originally Posted by steved033

I've got the knack to hunt barn find cars...I just don't have the capital or space to buy them all....

sjd

Well should you find a mint 58 chevy pickup you don't have the space for, I'm willing to help out

Also thanks for the pics

I guess my wife will have to go visit her cousins in Atlanta

markeb01 · 04-01-2014, 01:36 PM

Nice collection. Welcome! Looking forward to the truck progress.

steved033 · 04-07-2014, 08:23 AM

I'll keep an ear out for that '58...

I should probably start a build thread. This weekend, I set the timing correctly, adjusted the carb, and did a couple laps around the neighborhood. Oil pressure is low...about 20 psi when running, but when hot, it drops to 5 psi at idle. I pulled the plugs to check them, I was worried as there's a miss and as there's definitely some blowby coming out the vent, 1-5 are perfect. #6 is oily and gunky...well, I thought, that explains that tiny little miss...I cleaned it up, and now that everything is tuned in, and not overheating (the truck had WAY too much advance...) i'll see what happens.

sjd

jhrusk · 04-07-2014, 11:38 AM

welcome

03-31-2014, 09:22 AM	#1
steved033 Registered User Join Date: Mar 2014 Location: Lawrenceville, GA Posts: 22	Greetings from Atlanta Hey everyone, I just joined up because I've had a '66 fleetside longbed for a couple months now. The truck was a light blue 250/3 on the tree that became dark green, that became flat black, and a 3 on the floor conversion. I've been going through things and making them better. The dash was a non-gauge, and most of the bulbs were burned out (that's another thread, as I put aftermarket 2" gauges behind the glass), the wiring was a disaster, the fuse block had bits of copper pipe instead of fuses, extra wires were run around inside, there's no turnsignals, and it runs hot. I thought the hot running was the thermostat, but that doesn't seem to be the case. Plans are to build something custom, 5.3 swap, auto, airbags.... anyway, thought i'd say hi! Steve

03-31-2014, 09:48 AM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Greetings from Atlanta Welcome from Canton ,check out the n Ga section .

03-31-2014, 11:18 AM	#3
steved033 Registered User Join Date: Mar 2014 Location: Lawrenceville, GA Posts: 22	Re: Greetings from Atlanta awesome...did. sjd

03-31-2014, 01:10 PM	#4
Mathew21 Registered User Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: Greetings from Atlanta Welcome, Post some pictures when you get a chance.

03-31-2014, 01:17 PM	#5
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: Greetings from Atlanta Yep we need pics, lots of pics. Ohh and Welcome! __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

03-31-2014, 01:41 PM	#6
steved033 Registered User Join Date: Mar 2014 Location: Lawrenceville, GA Posts: 22	Re: Greetings from Atlanta Here's one from the day I got it. I traded a 1968 Plymouth Fury Convertible for it--even trade....not sure who got the better deal, but man, it's easier to find parts for this thing. I included a pic of the Fury, too. I had no room inside for it, and it had no roof... The truck is solid. Someone welded a piece of diamond plate in the bed, and it's not fastened down in the corner that looks saggy in the picture. the frame is straight and solid. The chevy is cool, I don't think the water pump is pumping...that'll be this coming weekend's project. It'll pass 230 degrees, there's a new thermostat, and there's a weird rattle that isn't pushrods or bottom end near the fan... I have a new pump and radiator...we'll see. sjd Attached Images

03-31-2014, 01:48 PM	#7
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: Greetings from Atlanta Nice looking truck! Does sound like you have a water flow issue. Hope yer able to easily fix it. And welcome from Oregon! T.J. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

03-31-2014, 04:26 PM	#8
Old Bleu Registered User Join Date: Jul 2013 Location: Loganville, GA Posts: 115	Re: Greetings from Atlanta Hi Steve, I'm out beyond Loganville. I've only had my '64 since last May, but if you need any help, don't hesitate to ask. This folks on this forum can answer any truck questions that you have for sure.

03-31-2014, 11:34 PM	#9
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Greetings from Atlanta Welcome to the forum and nice vehicles.

04-01-2014, 12:22 AM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Greetings from Atlanta Welcome to the forum Steve __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-01-2014, 08:39 AM	#12
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: Greetings from Atlanta Welcome and great looking project. Had a buddy growing up who was big into GTX's...spent quite a few nights cruising the blvd in them. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

04-01-2014, 09:39 AM	#13
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: Greetings from Atlanta Show us pics of your other toys too ,especially the GTX .

04-01-2014, 10:16 AM	#15
Jeff La Registered User Join Date: Dec 2011 Location: Donaldsonville, La. Posts: 1,024	Re: Greetings from Atlanta Allright don't be stingy where's the austin LOL

04-01-2014, 01:36 PM	#18
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Greetings from Atlanta Nice collection. Welcome! Looking forward to the truck progress. __________________ My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502

04-07-2014, 08:23 AM	#19
steved033 Registered User Join Date: Mar 2014 Location: Lawrenceville, GA Posts: 22	Re: Greetings from Atlanta I'll keep an ear out for that '58... I should probably start a build thread. This weekend, I set the timing correctly, adjusted the carb, and did a couple laps around the neighborhood. Oil pressure is low...about 20 psi when running, but when hot, it drops to 5 psi at idle. I pulled the plugs to check them, I was worried as there's a miss and as there's definitely some blowby coming out the vent, 1-5 are perfect. #6 is oily and gunky...well, I thought, that explains that tiny little miss...I cleaned it up, and now that everything is tuned in, and not overheating (the truck had WAY too much advance...) i'll see what happens. sjd



Register or Log In To remove these advertisements.

04-07-2014, 11:38 AM	#20
jhrusk Registered User Join Date: Nov 2011 Location: mid ga Posts: 553	Re: Greetings from Atlanta welcome __________________ check out SANFORD build thread http://67-72chevytrucks.com/vboard/s...d.php?t=522019

Register or Log In To remove these advertisements.