The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-09-2014, 08:25 PM   #1
FLYNAVY30
Registered User
 
Join Date: Apr 2013
Location: Austin, TX
Posts: 592
Front springs after LS swap?

I have a '72 3/4 ton C20 that I swapped the original 402 big block in favor of an LS6. After taking all that weight off the nose, it now sits pretty nose high in the front. Would I be better cutting a coil off the original big block springs, or replacing them with the small block springs from the C10? Some may disagree with me, but I personally preferred the slightly nose low rake of the original truck.

Thanks!
FLYNAVY30 is offline   Reply With Quote
Old 05-09-2014, 09:07 PM   #2
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
Re: Front springs after LS swap?

I like a nose down rake also Here goes...I would opt for the light weight spring set, maybe let em settle in a tad & see how you like the height? If you opt to cut a ring, figure about a 2" drop on the suspension. When you cut the spring, it will make it effectively stiffer. You may also need to cut bump stops on the lower arms, & relocate the shocks on top... (been there) best of fun, Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 05-09-2014, 09:10 PM   #3
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: Front springs after LS swap?

ls's are even lighter still; the sbc springs are your best bet. Cut BB springs will still be stiffer and probably bouncy, plus you change the spring rate when you heat/cut them. Springs are cheap, you can find some used sbc springs easy, or go right ahead and order some nice aftermarket springs.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 05-09-2014, 09:30 PM   #4
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
Re: Front springs after LS swap?

Cut is ok on a spring,if done properly...(figure no more that 1 full ring, if you want it to ride). Heated is a BIG NO- NO, on a spring! Some will say do not use a torch to cut....I tossed mine upside down, in a 5 gallon bucket of water. Just left the last 1" exposed, for cutting? Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 05-10-2014, 12:03 AM   #5
littlevictories
Registered User
 
Join Date: Dec 2013
Location: Portland, Ore.
Posts: 348
Re: Front springs after LS swap?

man i will never cut a spring again. makes the ride so harsh.
springs are cheap. I figure my time is worth about $50/hr

and hour to pull em
another hour to cut em
another to bolt em back in
im money ahead just buying em like i want em
and if i change my mind there's always someone to buy em
littlevictories is offline   Reply With Quote
Old 05-10-2014, 02:39 AM   #6
FLYNAVY30
Registered User
 
Join Date: Apr 2013
Location: Austin, TX
Posts: 592
Re: Front springs after LS swap?

yea, for the price, Ill probably go ahead and swap in the small block springs in the front and see how she looks/rides and go from there
FLYNAVY30 is offline   Reply With Quote
Old 05-10-2014, 12:08 PM   #7
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: Front springs after LS swap?

Cutting one complete coil gives you approximately 2" worth of drop. It's worth it just to see what it gives you.
Hart_Rod is offline   Reply With Quote
Old 05-10-2014, 09:31 PM   #8
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
Re: Front springs after LS swap?

Quote:
Originally Posted by Hart_Rod View Post
Cutting one complete coil gives you approximately 2" worth of drop. It's worth it just to see what it gives you.
Agree with the 2" per coil drop just to add, you need to start with the litest spring, as they do get effectively stiffer, as you shorten them My thoughts ,are that the BB spring, with a cut coil will be way harsh on the ride? Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 05-10-2014, 09:44 PM   #9
FLYNAVY30
Registered User
 
Join Date: Apr 2013
Location: Austin, TX
Posts: 592
Re: Front springs after LS swap?

the ride quality issue is why Im leaning towards the small block 1/2 ton spring from the C10
FLYNAVY30 is offline   Reply With Quote
Old 05-10-2014, 10:04 PM   #10
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
Re: Front springs after LS swap?

I think that you are looking at the situation properly When /if you cut the springs, there will be a couple other issue to address. I pulled the bottom rubber 'snubbers', & cut the bump stops off. I did leave the stear stops in place, & opted to drill a hole in the lower arm, to use a traction bar snubber. The other spots to watch....I flipped the sway bar upside /down , for clearance, & fabbed some shock extenders, to keep the stock length shock. If you are not "crazy" into fab, I think that Porter- Built, can help you on the shock extenders? Any ?, post em up...or shoot me a pm, on my setup? Best of fun...Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 05-10-2014, 11:43 PM   #11
First c10
Registered User
 
First c10's Avatar
 
Join Date: Dec 2012
Location: Los Banos CA
Posts: 2,705
Re: Front springs after LS swap?

I dropped my truck before the all aluminum ls swap. After it raised the truck front about 1 inch. I plan to put 1" lower springs to put it back to before ls stance.
__________________
1956 Chevy Bel Air 2 door
1956 Chevy 210 4 Door
1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD
1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E
1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR *SOLD*
GO GO!!!
First c10 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:51 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com