replacing windor regulator shafts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roundhouse · 05-21-2014, 08:59 PM

our K-10

has the 1973 doors with the one year only small rollers on the regulators.

the teeth on the shaft where the crank handle goes are stripped

other than watching out for the spring tension , any reason we couldnt drill out the rivets and replace the crank shafts with ones from our 82 parts truck?

that will also let us use the door panels the 82

otherwise Im stumped as to how to address this problem.

05-21-2014, 08:59 PM	#1
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	replacing windor regulator shafts our K-10 has the 1973 doors with the one year only small rollers on the regulators. the teeth on the shaft where the crank handle goes are stripped other than watching out for the spring tension , any reason we couldnt drill out the rivets and replace the crank shafts with ones from our 82 parts truck? that will also let us use the door panels the 82 otherwise Im stumped as to how to address this problem.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.