|
|
|
07-05-2014, 04:02 PM
|
#1 |
|
Registered User
Join Date: Aug 2008
Location: canada
Posts: 87
|
52+v8+champion rad
i have a 52 3600 with a smallblock and a champion radiator. what rad hoses would you guys suggest i try
thanks |
|
|
|
07-05-2014, 04:15 PM
|
#2 |
|
Registered User
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,711
|
Re: 52+v8+champion rad
On the upper you will probably be looking at a curved hose or one you can cut the curve out of that is the right diameter and has a section the right shape and length. Maybe the standard SB hose for a mid 70's pickup if it looks like you can cut the ends off just right to get a nicely shaped hose out of the middle. Outside of hauling the truck to the parts house I'd suggest taking a wire or something that you can bend that will hold it's shape and bend the shape you want and go looking.
On the bottom hose it is again search through the available sbc hoses but you might start with the ones for 55/57 Chevies.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
|
|
07-05-2014, 04:20 PM
|
#3 |
|
Registered User
Join Date: Aug 2008
Location: canada
Posts: 87
|
Re: 52+v8+champion rad
unfortunately the local part stores keep a very limited stock of hoses in house and even then they wont go looking for one without a part number. which is why i asked. maybe someone has part numbers handy
|
|
|
|
|
07-05-2014, 06:46 PM
|
#4 |
|
Registered User
Join Date: Sep 2013
Location: Morro Bay, California
Posts: 447
|
Re: 52+v8+champion rad
A while back these numbers were posted: NAPA upper 7240, lower 7438, I don't recall who posted them, sorry. Some "cut to fit" was advised.
I hope they work 'cause my truck has a gm 5.7 and a 4 row Champion radiator.!! |
|
|
|
|
07-05-2014, 09:44 PM
|
#5 | |
|
Registered User
Join Date: Aug 2008
Location: canada
Posts: 87
|
Re: 52+v8+champion rad
Quote:
|
|
|
|
|
|
07-05-2014, 09:44 PM
|
#6 |
|
Registered User
Join Date: Aug 2013
Location: Chino Valley, Az
Posts: 41
|
Re: 52+v8+champion rad
I have a SBC 350 with a Classic 'desert cooler' and I used a Gates 20597 for lower. Cut-to-fit tho. Upper is a 19"(I think) Gates 25480. But I have a forward facing 45* waterneck. A 17" hose should work, I was too lazy to walk around the corner to auto parts house.
__________________
|
|
|
|
|
07-06-2014, 12:58 PM
|
#7 |
|
Registered User
Join Date: Jan 2012
Location: Motown
Posts: 7,680
|
Re: 52+v8+champion rad
i made a custom hose to clear my air cleaner using partial hose and some 1.5'' ss tube
__________________
cool, an ogre smiley  Ogre's 58 Truk buildhow to put your truck year and build thread into your signature shop air compressor timer |
|
|
|
|
07-06-2014, 04:22 PM
|
#8 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: 52+v8+champion rad
Mine is a TF so numbers will not help. I bent coat hanger wire to the configuration I needed for upper and lower and took them to Orielys. Guy walked back and in less than 5 minutes brought be 3 of each to look at. I had to cut some off of one end on both, but look like they were made for the truck.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
|
07-06-2014, 06:36 PM
|
#9 |
|
Registered User
Join Date: Nov 2012
Location: Post Falls, Idaho
Posts: 1,757
|
Re: 52+v8+champion rad
I do not recall the Napa number I picked up.....
|
|
|
|
|
07-06-2014, 10:24 PM
|
#10 |
|
Registered User
Join Date: Aug 2008
Location: canada
Posts: 87
|
Re: 52+v8+champion rad
I picked up napa 7438 and 7240 and they fit fine with some trimming.
thanks   fyi napa 7438 = gates 20584 napa 7240 = gates 20416 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
