|
|
|
07-14-2014, 11:07 PM
|
#1 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Help!!!!
I just bought the 12" drop spindle disc brake kit from cpp and installed it on my truck 68 c-10. I then got 73-88 4x4 steel wheels to accommodate for the disc brakes, but these wheels are rubbing the caliper. I would just like to know what other people do to either keep the steel wheel look or what 6 lug aluminum wheels people have used?? I open to anything, thanks in advance!!
|
|
|
|
07-15-2014, 09:34 AM
|
#2 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,780
|
Re: Help!!!!
Do you have a link to the kit you bought?
You might need a spacer or a little clearancing on the caliper. |
|
|
|
|
07-15-2014, 09:44 AM
|
#3 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
Yeah here is the link. http://www.classicperform.com/NewPro...opSpindles.htm
|
|
|
|
|
07-15-2014, 09:54 AM
|
#4 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,780
|
Re: Help!!!!
A little more specific would be nice!!
|
|
|
|
|
07-15-2014, 10:21 AM
|
#5 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
It is the very first chevy truck kit labeled, Chevy Truck- 2" drop spindle.
|
|
|
|
|
07-15-2014, 10:42 AM
|
#6 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,780
|
Re: Help!!!!
Which wheels?
5 or 6 lug? How close are they? You might need an 1/8 inch spacer. |
|
|
|
|
07-15-2014, 11:55 AM
|
#7 |
|
Senior Member
Join Date: Jul 2004
Location: Texas
Posts: 858
|
Re: Help!!!!
It's been 10 years or so, but when I added a disc brake kit to my truck, I had to get longer studs and spacers.
__________________
Hook'em |
|
|
|
|
07-15-2014, 01:45 PM
|
#8 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
Here's some pics of where and what's rubbing. These wheels are also 6 lug btw.
|
|
|
|
|
07-15-2014, 01:47 PM
|
#9 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
|
|
|
|
|
07-15-2014, 01:49 PM
|
#10 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
|
|
|
|
|
07-15-2014, 03:15 PM
|
#11 |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,136
|
Re: Help!!!!
How much contact is being made? Is it something where you could grind a little off the caliper to clear?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
07-15-2014, 03:28 PM
|
#12 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,780
|
Re: Help!!!!
Most of your problem is centered on the fact that those aren't disc brake wheels.
|
|
|
|
|
07-15-2014, 03:36 PM
|
#13 |
|
Registered User
Join Date: Apr 2012
Location: san diego ca
Posts: 618
|
Re: Help!!!!
i put spacers on my rally's
|
|
|
|
|
07-15-2014, 05:46 PM
|
#14 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
They are 73-88 stock 4x4 wheels which I thought a lot of guys use those with disc brakes?
|
|
|
|
|
07-15-2014, 10:47 PM
|
#15 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
Where do I get wheel spacers?
|
|
|
|
|
07-16-2014, 12:07 PM
|
#16 | |
|
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 22,136
|
Re: Help!!!!
Quote:
I think the issue is just the particular combo of parts. Any way you could test fit a wheel on a buddys truck to see if there's an issue on an OE set-up? Or maybe try bolting on a 4x4 truck rally & see if you have the same clearance issue?
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
|
|
|
|
07-16-2014, 11:12 PM
|
#17 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
Thanks for all the help guys I tried 1/4" wheel spacers and that didn't work so I just bought these wheels from Speedway Motors! http://www.speedwaymotors.com/Speedw...nch,70842.html
|
|
|
|
|
07-16-2014, 12:00 AM
|
#18 |
|
Registered User
Join Date: Aug 2009
Location: Bowser
Posts: 13,780
|
Re: Help!!!!
|
|
|
|
|
07-16-2014, 12:22 AM
|
#19 |
|
Registered User
Join Date: Apr 2013
Location: near Grand Island, Nebraska
Posts: 211
|
Re: Help!!!!
Ok thanks!
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
