Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
08-12-2014, 12:06 PM | #1 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
1 ton jack & lug wrench?
Was there a special beefed up version of the jack and a 2 piece lug wrench for the 1 ton's like these shown below. (The jack has a heavier base plate)
I found these in a mid 70's 1 ton wrecker. Thanks,.
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
08-16-2014, 06:26 AM | #2 |
1969 Custom 30 wrecker
Join Date: Sep 2001
Location: Pottsville, Pa
Posts: 2,611
|
Re: 1 ton jack & lug wrench?
Nothing?
__________________
Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 |
11-24-2024, 09:09 PM | #3 |
Left Foot Functioning
Join Date: May 2004
Location: Duncan, OK
Posts: 350
|
Re: 1 ton jack & lug wrench?
Old thread, I know. This member doesn't show activity since 2015, but I did some searching and his post seems unique.
I'm sure the truck he pulled it from was equipped like my '82 K30. It came with the accessories mounted to the passenger fenderwell as shown, but I'm missing the jack. The 2-piece lug wrench is necessary for dually trucks, and it seems his idea that the jack is heavier is feasible. I would sure like to know more about the jack that I'm missing, and I think it's the one the OP shows. I'd also welcome opinion on whether the jack is worth looking for...for function, not just completeness. Anyone?
__________________
69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project) Last edited by stickshift_or_walk; 11-24-2024 at 10:04 PM. |
11-25-2024, 12:57 PM | #4 |
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,611
|
Re: 1 ton jack & lug wrench?
Image of a jack on a military CUCV(basically an 84K30). It was stored behind the seat as the CUCV had a 24V system with 2 batteries that took the fender area. Jack looks very similar to OPs pics. Should provide clues to other jack related stuff.
Image from the TM for the CUCVs. No clue on desirability. It was gone when I bought my M1008. |
11-25-2024, 03:54 PM | #5 | |
Left Foot Functioning
Join Date: May 2004
Location: Duncan, OK
Posts: 350
|
Re: 1 ton jack & lug wrench?
Quote:
__________________
69 C10 (#1 son's ride) 72 C20 (Dad's farm truck) 82 K30 (Ex - brush pumper project) |
|
Bookmarks |
|
|