|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-23-2014, 08:48 PM
|
#1 |
|
Registered User
Join Date: Dec 2013
Location: Carlsbad
Posts: 133
|
12 bolt issues. Need advice
I was in the process of cchanging out my rear axles and disc brakes but didn't get too far. I was taking the bolt out of the rear end that hold in the spider gear shaft and the bolt was broken. I still have a little threads in there and cannot drop out the shaft. Has anyone drilled this out in place and tapped it for 3/8? I really don't want to take the whole housing out plus I have to get the axles first. It's a stock rear end. Any advice will help. Thanks in advance.
|
|
|
|
09-23-2014, 09:18 PM
|
#2 |
|
The Older Generation
   
Join Date: Aug 2006
Location: Montezuma, Iowa
Posts: 25,896
|
Re: 12 bolt issues. Need advice
-
I had the same problem and worked on it for days. I ordered one of these kits and had it out in about 15 minutes....  Amazon.com: Differential Pinion Shaft Lock Bolt...LockDoc
__________________
Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 - |
|
|
|
|
09-23-2014, 09:24 PM
|
#3 |
|
Registered User
Join Date: Jun 2014
Location: Glendale, Arizna
Posts: 1,642
|
Re: 12 bolt issues. Need advice
Whatever you do don't drill out for a larger size. Do what LockDoc says, but first spray WD-40 in there and blow it in with compressed air, then repeat that several times so the threads are lubed. Usually they will then come out with an 0-ring pick, but no matter how tempting do not beat on it or use a punch; that can cause agonizing results.
Last edited by mechanicalman; 09-23-2014 at 09:26 PM. Reason: spelling |
|
|
|
|
09-23-2014, 09:44 PM
|
#4 |
|
Registered User
Join Date: Dec 2013
Location: Carlsbad
Posts: 133
|
Re: 12 bolt issues. Need advice
I will be ordering that and giving it a try. Thanks for the info.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
