CA Parting '72 Suburban. Loaded. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cheyenne shortstep · 10-03-2014, 04:26 PM

This is a C/20 "burb with P.S., P.B., A.C., rear A.C., tach, manual throttle w/TH400 kickdown, tailgate/liftgate [some rust in liftgate ONLY, nice sheetmetal. No original seats or seatbelts, no grille. I will post some prices with pics, let me know what you want and I will post prices and pics.

cheyenne shortstep · 10-03-2014, 04:38 PM

Tach dash tested and working [tach], circuit board is burnt and been repaired? With harness that has been modified for HEI. $275 shipped.
This bezel has the holes for rear A.C. and manual throttle, I will swap out for the other bezel shown in the pic. at no extra charge.

Manual throttle with dash plate and deluxe knob, bracket and kickdown switch for TH400, pedal assy and cable. $125 shipped

**71blksuper4x4** · 10-03-2014, 05:08 PM

I need a 72 driver's rear fake door window regulator and how is the doors all 3? Thanks Trevor

adam9496 · 02-19-2015, 06:05 PM

Quote:

Originally Posted by cheyeshortstep

Tach dash tested and working [tach], circuit board is burnt and been repaired? With harness that has been modified for HEI. $275 shipped.
This bezel has the holes for rear A.C. and manual throttle, I will swap out for the other bezel shown in the pic. at no extra charge.

Manual throttle with dash plate and deluxe knob, bracket and kickdown switch for TH400, pedal assy and cable. $125 shipped

How did you modify the harness to make the factory tach work with HEI? Im currently having that problem. Thanks

bhahn70 · 02-25-2015, 02:35 AM

Was wondering if you have any air conditioning parts left. Mainly need the dash rear a/c switch. Thanks,Brian

cheyenne shortstep · 02-25-2015, 11:41 AM

ajlezama, no headliner bows.

engairuph, here are the plastic piece that goes on the firewall and a ign. bezel that should clean up decent. $17 shipped for both.

adam9496, I am no electrical genius by no means, [my weak point] but I'm pretty sure you just need to change the connector to plug into the HEI cap??

bhahn 70, I have another switch but no knob, I will pull it and test it.

engairuph · 02-26-2015, 07:54 AM

Quote:

Originally Posted by cheyenne shortstep

ajlezama, no headliner bows.

engairuph, here are the plastic piece that goes on the firewall and a ign. bezel that should clean up decent. $17 shipped for both.

adam9496, I am no electrical genius by no means, [my weak point] but I'm pretty sure you just need to change the connector to plug into the HEI cap??

bhahn 70, I have another switch but no knob, I will pull it and test it.

I'll pass, the plastic I need is for 69 yours is 71-72. What are you asking for the rear a/c?

bluek5 · 10-03-2014, 05:06 PM

Interested in the throttle stuff could you take some better pictures of the knob?
Thanks, Paul

budnikguy · 10-03-2014, 05:29 PM

How clean are the 3 doors? Interested

**Bgrdmoose** · 10-03-2014, 05:41 PM

Interested in rear bumper & tow hitch. What size fuel tank?

cheyenne shortstep · 10-03-2014, 06:01 PM

bluek5- here is a better pic of the knob, it is all real nice.

72blksuper4x4- $50 shipped for the left rear window regulator. Doors are nice, fronts have 6x9 speaker holes. I will post pics but it will probably be tomorrow as we are heading for Cruisin' Grand, it's Nitro Night.

budnikguy- you are 2nd in line for the doors, shipping will probably kill the deal for the first guy.

bgrdmoose- the rear bumper is nice, I will get pics of it, the hitch, and the tank which is a very large aftermarket. I want $100 + shipping for the bumper, $30 + shipping for the hitch. I will inspect the tank and check on shipping cost for the bumper and hitch.

72K20- yea it would probably be expensive. If you want to check on shipping cost my zip is 92084 Vista, Ca.

1972K20 · 10-03-2014, 05:57 PM

I'd take the shell/tub if it wouldn't cost an arm and a leg to get it to Alabama.

nobolt · 10-03-2014, 06:24 PM

i'll jump in line for the rear bumper.

**Bgrdmoose** · 10-03-2014, 07:05 PM

If the suburban has the large 45+ gallon tank then I will for sure take the tow hitch. I would also be interested in the 4 long bolts that hold up the tank as well as the sending unit. I'll wait for pictures before committing to the bumper. Shipping to 98144. Thanks.

cheyenne shortstep · 10-03-2014, 07:28 PM

Tilt and tach sold locally.

ceribus12 · 11-15-2014, 03:30 PM

You said the tilt is for sale locally, but would you be willing to ship? I'm located at 28376 in NC.

cheyenne shortstep · 11-16-2014, 12:12 AM

ceribus12- the tilt sold local the first day this 'Burb showed up at my place.

bluek5 · 10-03-2014, 08:01 PM

I want to make sure the knob is correct, before I say I'll take it.
Thanks, Paul

**rockc** · 10-03-2014, 08:57 PM

I would be interested in the roof hatch pending condition and price.
Rock C

waylonbud · 10-03-2014, 09:30 PM

I am interested in the tailgate/hatch latch button assembly with the bezel. Shipping is to 37303.
Thanks.

DEISS · 10-03-2014, 09:36 PM

Is the license plate frame and light being sold with the rear bumper? If the buyer of the rear bumper does not want it, I'll take it pending price and condition.

WhiteWhale · 10-03-2014, 10:42 PM

Ill get in line for the upper hatch. I need an original paint one in white.

WhiteWhale · 10-03-2014, 10:47 PM

Almost forgot, whats the price on the front? Condition?

Im in Southern California so will pick up with cash

rusted72' · 10-04-2014, 03:29 AM

I would be interested in the power steering pump with brackets, for a short water pump setup. how much shipped to 92805? pics?
thanks

72MARIO · 10-04-2014, 07:57 AM

How co.plete is the read overhead Ac. I am very interested in it.

10-03-2014, 04:26 PM	#1
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Parting '72 Suburban. Loaded. This is a C/20 "burb with P.S., P.B., A.C., rear A.C., tach, manual throttle w/TH400 kickdown, tailgate/liftgate [some rust in liftgate ONLY, nice sheetmetal. No original seats or seatbelts, no grille. I will post some prices with pics, let me know what you want and I will post prices and pics. Attached Images

10-03-2014, 04:38 PM	#2
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 Suburban. Loaded. Tach dash tested and working [tach], circuit board is burnt and been repaired? With harness that has been modified for HEI. $275 shipped. This bezel has the holes for rear A.C. and manual throttle, I will swap out for the other bezel shown in the pic. at no extra charge. Manual throttle with dash plate and deluxe knob, bracket and kickdown switch for TH400, pedal assy and cable. $125 shipped Attached Images

10-03-2014, 05:08 PM	#3
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,156	Re: Parting '72 Suburban. Loaded. I need a 72 driver's rear fake door window regulator and how is the doors all 3? Thanks Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

02-25-2015, 02:35 AM	#5
bhahn70 Registered User Join Date: Feb 2015 Location: Glendale, AZ Posts: 1,236	Re: Parting '72 Suburban. Loaded. Was wondering if you have any air conditioning parts left. Mainly need the dash rear a/c switch. Thanks,Brian

02-25-2015, 11:41 AM	#6
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 Suburban. Loaded. ajlezama, no headliner bows. engairuph, here are the plastic piece that goes on the firewall and a ign. bezel that should clean up decent. $17 shipped for both. adam9496, I am no electrical genius by no means, [my weak point] but I'm pretty sure you just need to change the connector to plug into the HEI cap?? bhahn 70, I have another switch but no knob, I will pull it and test it. Attached Images

10-03-2014, 05:06 PM	#8
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Parting '72 Suburban. Loaded. Interested in the throttle stuff could you take some better pictures of the knob? Thanks, Paul

10-03-2014, 05:29 PM	#9
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: Parting '72 Suburban. Loaded. How clean are the 3 doors? Interested

10-03-2014, 05:41 PM	#10
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Parting '72 Suburban. Loaded. Interested in rear bumper & tow hitch. What size fuel tank?

10-03-2014, 06:01 PM	#11
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 Suburban. Loaded. bluek5- here is a better pic of the knob, it is all real nice. 72blksuper4x4- $50 shipped for the left rear window regulator. Doors are nice, fronts have 6x9 speaker holes. I will post pics but it will probably be tomorrow as we are heading for Cruisin' Grand, it's Nitro Night. budnikguy- you are 2nd in line for the doors, shipping will probably kill the deal for the first guy. bgrdmoose- the rear bumper is nice, I will get pics of it, the hitch, and the tank which is a very large aftermarket. I want $100 + shipping for the bumper, $30 + shipping for the hitch. I will inspect the tank and check on shipping cost for the bumper and hitch. 72K20- yea it would probably be expensive. If you want to check on shipping cost my zip is 92084 Vista, Ca. Attached Images

10-03-2014, 05:57 PM	#12
1972K20 Registered User Join Date: Nov 2010 Location: Alabama Posts: 741	Re: Parting '72 Suburban. Loaded. I'd take the shell/tub if it wouldn't cost an arm and a leg to get it to Alabama.

10-03-2014, 06:24 PM	#13
nobolt Registered User Join Date: Oct 2011 Location: Algonac, MI 48001 Posts: 1,848	Re: Parting '72 Suburban. Loaded. i'll jump in line for the rear bumper. __________________ Dave "... government even in its best state is but a necessary evil. Thomas Paine "It wasn't a lie, it was ineptitude with insufficient cover." Donald Draper (Mad Men)

10-03-2014, 07:05 PM	#14
Bgrdmoose Senior Member Join Date: Aug 2012 Location: College Park, MD Posts: 437	Re: Parting '72 Suburban. Loaded. If the suburban has the large 45+ gallon tank then I will for sure take the tow hitch. I would also be interested in the 4 long bolts that hold up the tank as well as the sending unit. I'll wait for pictures before committing to the bumper. Shipping to 98144. Thanks.

10-03-2014, 07:28 PM	#15
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 Suburban. Loaded. Tilt and tach sold locally.

11-15-2014, 03:30 PM	#16
ceribus12 Registered User Join Date: Oct 2011 Location: Raeford NC Posts: 3	Re: Parting '72 Suburban. Loaded. You said the tilt is for sale locally, but would you be willing to ship? I'm located at 28376 in NC. __________________

11-16-2014, 12:12 AM	#17
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: Parting '72 Suburban. Loaded. ceribus12- the tilt sold local the first day this 'Burb showed up at my place.



Register or Log In To remove these advertisements.

10-03-2014, 08:01 PM	#18
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: Parting '72 Suburban. Loaded. I want to make sure the knob is correct, before I say I'll take it. Thanks, Paul Attached Images

10-03-2014, 08:57 PM	#19
rockc Registered User Join Date: Jul 2007 Location: SE WY Posts: 640	Re: Parting '72 Suburban. Loaded. I would be interested in the roof hatch pending condition and price. Rock C __________________ 72 chevy 3/4 ton 4X4

10-03-2014, 09:30 PM	#20
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting '72 Suburban. Loaded. I am interested in the tailgate/hatch latch button assembly with the bezel. Shipping is to 37303. Thanks.

10-03-2014, 09:36 PM	#21
DEISS Registered User Join Date: Nov 2010 Location: Big Bear Lake, CA. Posts: 291	Re: Parting '72 Suburban. Loaded. Is the license plate frame and light being sold with the rear bumper? If the buyer of the rear bumper does not want it, I'll take it pending price and condition.

10-03-2014, 10:42 PM	#22
WhiteWhale Registered User Join Date: Apr 2014 Location: Southern California Posts: 200	Re: Parting '72 Suburban. Loaded. Ill get in line for the upper hatch. I need an original paint one in white.

10-03-2014, 10:47 PM	#23
WhiteWhale Registered User Join Date: Apr 2014 Location: Southern California Posts: 200	Re: Parting '72 Suburban. Loaded. Almost forgot, whats the price on the front? Condition? Im in Southern California so will pick up with cash

10-04-2014, 03:29 AM	#24
rusted72' Registered User Join Date: Nov 2013 Location: Whittier, CA Posts: 120	Re: Parting '72 Suburban. Loaded. I would be interested in the power steering pump with brackets, for a short water pump setup. how much shipped to 92805? pics? thanks

10-04-2014, 07:57 AM	#25
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: Parting '72 Suburban. Loaded. How co.plete is the read overhead Ac. I am very interested in it. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Register or Log In To remove these advertisements.