|
|
|
10-10-2014, 03:44 PM
|
#1 |
|
Registered User
 
Join Date: Apr 2014
Location: Oakland, Ca.
Posts: 66
|
Cooling system flush
Quick question, what do you guys recommend when installing a new radiator. I want to flush the cooling system and heater core but don't really care about flushing the old radiator since it's getting replaced. Should I just flush the cooling system with the old radiator still in or can I just drain the system and run a hose to the upper radiator hose and flush the motor that way? Thanks.
|
|
|
|
10-10-2014, 05:06 PM
|
#2 |
|
Registered User
Join Date: Aug 2012
Location: Fort Campbell, KY
Posts: 494
|
Re: Cooling system flush
I would flush with the old radiator until the water was clear, then I would drain, install new radiator, fill with 50/50 antifreeze and water. My thought process is I wouldnt want any old stuff from the block coming into my new radiator, so get everything clean prior to installing the new one. Good luck.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
