|
10-11-2014, 11:09 PM | #1 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
69 c10 ls swap
Hello to all. I am going to post some pics of my build. I am currently about to start sanding and painting Frame and crossmember. I will post pictures of prior and or current and will make a parts list as well.
NOT INSTALLED YET: 5.3 ls 4L60E early classics crossmember Early classics ls mounts and towers Wait4meperformance tune and moded harness painted valve covers by urs truly current performance ceramic coated headers classic parts body and radiator mounts lmc under bed blazer tank corvette servo walbro pump corvette regulator ORIGINAL: inline 6 3 spd column shift I had to remove the trans crossmember that was riveted in. Let me start with that is a horrible design however nothing a air Hamer and chisel couldnt take care of. I also pulled the front clip to make easier access. I am currently looking for power brakes and power steering box as well as a stock auto steering column. As of now this is where I am. |
10-12-2014, 06:07 PM | #2 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
Re: 69 c10 ls swap
Today I used a wire brush on frame and painted. I will share a few pics.
|
10-12-2014, 06:08 PM | #3 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
Re: 69 c10 ls swap
Tomorrow is mounts and crossmember and hopefully will be in buisness with a motor in place.
|
10-12-2014, 07:37 PM | #4 |
Registered User
Join Date: Jul 2009
Location: San Jose Ca
Posts: 2,871
|
Re: 69 c10 ls swap
Paint looks really good. What did you use?
__________________
David Used parts build: http://67-72chevytrucks.com/vboard/s...d.php?t=638991 My brother's Nova: http://www.67-72chevytrucks.com/vboa...d.php?t=727985 Rear suspension rework: http://www.67-72chevytrucks.com/vboa...d.php?t=750557 Instagram: myfabguy |
10-12-2014, 08:48 PM | #5 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
Re: 69 c10 ls swap
Duplicolor rust preventative and then top coat was hvt chassis paint. Gloss black. It looks really nice. And I scratched it earlier and hit it again with some paint after everything was dry and u couldn't even tell I touched it up. I will defiantly use this paint again. I like it.
|
10-13-2014, 04:59 PM | #6 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
Re: 69 c10 ls swap
Gents the ls is in its new home.
|
10-14-2014, 09:50 AM | #7 |
Registered User
Join Date: Apr 2014
Location: Richmond Hill, GA
Posts: 119
|
Re: 69 c10 ls swap
A pic with my sanderson headers. So much clearance no cutting at all this set up really works great.
|
Bookmarks |
|
|