Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
10-12-2014, 12:30 AM | #1 |
Registered User
Join Date: Dec 2013
Location: Portland, Ore.
Posts: 348
|
cts-v oil pump pickup into '99 ls1 pump
I googled and searched, but I can't seem to find a final word.
I'm putting a CTS-V pan and pickup onto a 5.3 using a pump from a '99 LS1 (part # 12556436) Which color o-ring should I use? Thanks. DD |
10-14-2014, 01:45 AM | #2 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: cts-v oil pump pickup into '99 ls1 pump
Use the ring that comes with the tube....you should be ok....Longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
10-14-2014, 10:48 PM | #3 |
Registered User
Join Date: Dec 2013
Location: Portland, Ore.
Posts: 348
|
Re: cts-v oil pump pickup into '99 ls1 pump
here's the application chart I found off Tech
BLUE SEAL Specifics: * Oil Pick-Up Tube O-Ring ea. * Chevy/GMC Pick-Up (1999-2000 LS V8) 1st design * F-Body (1998-2002) * Cadillac CTS-V (2004-2007) * Corvette (1997-2008) * Thickness = 3.55mm (0.140") ID = 23.60mm (0.930") GM Oil Pick-Up Tube O-Ring (2nd Design) 12584922 RED SEAL Specifics: * Oil Pick-Up Tube O-Ring ea. * Chevy/GMC Pick-Up (1999-2000 LS V8 engines with 2nd design pick-up tube) * Trailblazer (2003-2008 With LS V8 engine) * Hummer H2 (2003-2008) * Hummer H3 (2008 With LS V8 engine) * Chevy/GMC Pick-Up (2001-2008 LS V8 engines) * W- Body (2006-2008 With LS V8 engine - Impala, Lacrosse, Grand Prix) * Thickness = 4.20mm (0.165") ID = 20.69mm (0.815") which is not very useful to me, since the felpro kit comes with red, green and black o-rings…not the blue one indicated above. :/ DD |
10-16-2014, 08:52 PM | #4 |
Fabricate till you "puke"
Join Date: Jun 2002
Location: Ill
Posts: 9,402
|
Re: cts-v oil pump pickup into '99 ls1 pump
I used the blue seal, that came with the "hotrod pan kit"....no issues? mine is running a 2000/5.3. longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears.... |
Bookmarks |
|
|