Removing side trim from 65 chevy pickup

['65 chevy lover]

How do you remove the side trim from 65 C10 chevy truck? Trying to get everything removed so I can take pics to sell. Thanks for any help.

Edit: I did a search before my post but, didn't find anything about removal of side trim.

Bump...anyone?

[joedoh]

its just clipped into holes drilled in the side sheetmetal so you can get a putty knife behind it and feel for the spring clip and pop pop pop all the way down.

except

the 4 cab pieces are attached from inside the cab, you cant pop those off unless you like bent pieces. Its why trim sets sell without those pieces because once guys bend them they are junk. use extra care removing the 4 small cab pieces behind the door.

['65 chevy lover]

Originally Posted by joedoh

its just clipped into holes drilled in the side sheetmetal so you can get a putty knife behind it and feel for the spring clip and pop pop pop all the way down.

except

the 4 cab pieces are attached from inside the cab, you cant pop those off unless you like bent pieces. Its why trim sets sell without those pieces because once guys bend them they are junk. use extra care removing the 4 small cab pieces behind the door.

Thank you very much for the reply!

[j.rigby15r]

Thank you for asking that question. Once you get them off let me know if you need a buyer. I need a set for my 64.

[jonzcustomshop]

fenders are bolted on, (the clips) the bed has the plastic clips, which will probably break as you take them off, might double check your doors, can't remember if they were plastic, or bolted.

['65 chevy lover]

Originally Posted by jonzcustomshop

fenders are bolted on, (the clips) the bed has the plastic clips, which will probably break as you take them off, might double check your doors, can't remember if they were plastic, or bolted.

Thanks alot for the reply, much appreciated!