Grant Steering Wheel Installation ?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigRed · 08-16-2003, 06:03 PM

I'm trying to install my new Grant wheel. I bought the 3196 Grant installation kit. I'm having a problem because the Grant hub is not sliding over my spline? At first, the backing plate on the hub was blocking the plastic horn shaft from coming through so I trimmed the backing plate. Once I got that done, it still won't fit over the column shaft. I thought maybe the plastic horn piece was still hitting, but I turned the hub around and it won't fit that way either.

Am I doing something wrong? Did anybody else that has Grant wheels have this problem?

gldevall · 08-16-2003, 06:22 PM

Mine went on pretty easy.

kballan · 08-16-2003, 06:31 PM

Mine went on with no problems at all. Are you sure they gave you the right installation kit?

Prerunner1982 · 08-16-2003, 06:33 PM

might double check and make sure that is the right part for the box. went to pick up an oil filter the other day and picked up the PF35L for $9.99 opened it up to make sure and the part number on the filter was for a PF1218 for $2.99. the PF1218 fits but its for a van and wasnt the top of the line special filter. if i hadnt checked i would have paid way too much for a filter.

BigRed · 08-16-2003, 06:39 PM

Thanks guys. I have double checked to make sure the part number is the correct one. I'll take it back and get another one. It very well may be the wrong part in the right box.

kballan · 08-16-2003, 06:49 PM

Kinda sounds that way. The hub should fit over the steering column with no problems.

apstguy · 08-16-2003, 10:40 PM

Mine fit fine, but it made my steering wheel off and tilt to the left (which is more comfortable & why I haven't fixed it)

BigRed · 08-17-2003, 04:14 PM

Well, took back the install kit, got another one (same part number). And this one had the right parts in it!

Amazing how well a part fits WHEN IT'S THE RIGHT ONE in the box!

kballan · 08-17-2003, 07:01 PM

LOL! Been there.

Prerunner1982 · 08-18-2003, 12:43 AM

glad things worked out for ya!

08-16-2003, 06:03 PM	#1
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Grant Steering Wheel Installation ?? I'm trying to install my new Grant wheel. I bought the 3196 Grant installation kit. I'm having a problem because the Grant hub is not sliding over my spline? At first, the backing plate on the hub was blocking the plastic horn shaft from coming through so I trimmed the backing plate. Once I got that done, it still won't fit over the column shaft. I thought maybe the plastic horn piece was still hitting, but I turned the hub around and it won't fit that way either. Am I doing something wrong? Did anybody else that has Grant wheels have this problem? __________________ Scott Shelbourne

08-16-2003, 06:22 PM	#2
gldevall Registered User Join Date: Mar 2003 Location: Walker, LA Posts: 2,925	Mine went on pretty easy. __________________ Gary -1986 SWB: lowered 4/6, SOLD!!! -Best 1/4 mile: 14.51 @ 91.01 MPH -2001 Pewter Tahoe, billet grill, Corsa Sport Cat-back, K&N FIPK SOLD!!! -2004 Z-71 Extended cab with a flowmaster, BDS 6.5", 3" BL, 35x12.5x18 Trail Grapplers on Pro-Comp 18x9 wheels

08-16-2003, 06:31 PM	#3
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	Mine went on with no problems at all. Are you sure they gave you the right installation kit? __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

08-16-2003, 06:33 PM	#4
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	might double check and make sure that is the right part for the box. went to pick up an oil filter the other day and picked up the PF35L for $9.99 opened it up to make sure and the part number on the filter was for a PF1218 for $2.99. the PF1218 fits but its for a van and wasnt the top of the line special filter. if i hadnt checked i would have paid way too much for a filter. __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call

08-16-2003, 06:39 PM	#5
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Thanks guys. I have double checked to make sure the part number is the correct one. I'll take it back and get another one. It very well may be the wrong part in the right box. __________________ Scott Shelbourne

08-16-2003, 06:49 PM	#6
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	Kinda sounds that way. The hub should fit over the steering column with no problems. __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

08-16-2003, 10:40 PM	#7
apstguy LED King Join Date: Jan 2003 Location: Sacramento, CA Posts: 2,087	Mine fit fine, but it made my steering wheel off and tilt to the left (which is more comfortable & why I haven't fixed it) __________________ Tyler 1985 C10 305 w/ Bowtie OD TH700R4 3.42 LSD 202,000 miles 2006 Ford Focus ZX3 5-speed Stick 2016 Chevy Spark EV Gone: 2002.5 VW GTI 24v VR6 Gone: 2008 VW R32

08-17-2003, 04:14 PM	#8
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Well, took back the install kit, got another one (same part number). And this one had the right parts in it! Amazing how well a part fits WHEN IT'S THE RIGHT ONE in the box! __________________ Scott Shelbourne

08-17-2003, 07:01 PM	#9
kballan Registered User Join Date: Jun 2003 Location: Fort Frances, Ontario, Canada Posts: 373	LOL! Been there. __________________ Kent Ballan ANY MAN CAN BUILD A TRUCK, BUT IT TAKES A REAL MAN TO CUT ONE UP!

08-18-2003, 12:43 AM	#10
Prerunner1982 Registered User Join Date: Oct 2002 Location: Edmond, OK Posts: 5,904	glad things worked out for ya! __________________ Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.