69 Camaro front valance and spoiler on a 67 c10?

[Possmguts]

Hello everyone.. new to the site and have some ideas I want to get input on.
Along the same lines as this discussion I just read about the front spoiler... Im looking to retrofit a front valance with the fog lights and spoiler from a 69 Camaro onto my 67 c10. I currently have the traditional roll pan up there but I feel like being a little different. Im even toying with the idea of something along the lines of the second pic. I think they both would look great. Anyone have any ideas on this?

[68shortwide]

This could be cool, there's another sub-forum for photoshoppers, if you post there im sure someone could make it happen, i love the idea!

[Possmguts]

Originally Posted by 68shortwide

This could be cool, there's another sub-forum for photoshoppers, if you post there im sure someone could make it happen, i love the idea!

Thanks, Ill have to look for that sub-forum and see what happens.

[skorpioskorpio]

This is a render I did of what I'm planning on doing on my Jimmy project, along the same lines:



Sectioned and stretched 67-68 Camaro bumpers, dimple died roll pan, and a Spoilers by Randy spoiler. Grill is a 71-72 GMC grill with the horizontals removed. Also considering recessing the fogs into the pan.

[Possmguts]

Originally Posted by skorpioskorpio

This is a render I did of what I'm planning on doing on my Jimmy project, along the same lines:

That looks AWESOME! The bumper is exactly what Im looking for too. Wasnt sure until I saw this.

[skorpioskorpio]

Also planning on doing sectioned and stretched Camaro bumper with a pan on the rear. I already did the dimples on the rear pan, here's a pic so you know what I'm talking about:



The rear would be a '69 bumper, the '67s and '68s are flat across the bottom and the '69s have a rise over the plate which would work better since there isn't a whole lot of room between the plate pocket in the pan and the bottom of the open tailgate.

[Tinkermc]

Looks very nice

[Possmguts]

Originally Posted by Tinkermc

Looks very nice

Thanks but really its a 30 footer right now... about to start over on everything the PO did... The body prep is not very good at all and the paint looks like it was done in a gravel lot in a wind storm by a blindfolded dude lol.

[Possmguts]

A little better look at what Im working with.
https://www.youtube.com/watch?v=chPp..._W-S8kPAyvPdMg

[CG]

I did a photoshop of something like this on one our trucks years ago ... its here on the board somewhere. No idea if I have it on a computer anymore.

[67ChevyRedneck]

Have you seen this truck? No spoiler but Camaro (obviously modified) bumpers front and rear (link below pics).

IMO you should only run a valence if you're going to run air ride. It only looks cool if it's dropped low, but if it's low it's going to scrape and get caught up on stuff (I have trouble driving my lowered mustang around in my area, and I only lowered it an inch).



http://67-72chevytrucks.com/vboard/s...547893&page=10

[Possmguts]

I dont plan on slamming it to the ground , what i have in mind is a mid 80s early 90s C4 Vette front suspension and cross member and coil overs in back. It will have more of a race stance than a slammed stance... and should perform well.
Theres a local guy doing the Vette suspensions around here that does beautiful work. I can get the full setup for the front for 400 bucks here and he has the jig and all to install it correctly. 1500 for labor.
That pic with the Camaro front and rear bumpers is exactly what Im looking for. Do you have a pic from the front of that?

[skorpioskorpio]

There are more pics of that grey truck around somewhere, lots of body work to make that happen the way he did it, and pretty sure the bumpers were attached to the bodywork so in that sense they are more like trim pieces than functioning bumpers. Don't get me wrong it's awesome work.

The plan on mine is to have bumpers that are at least as functional as they were on the Camaros, which isn't much, but it's something. The grey trucks "bumpers" if bumped will likely mangle the sheet metal behind them as much or more than if they weren't there.

Possmguts, what are you asking about how to do, the dimples or the sectioning? Oh and by the way, what you are describing is pretty much what I'm doing, you may want to scan my build thread.

[67ChevyRedneck]

Click the link below the pic. That's the build thread with more pics (not my truck so I don't have more pics).

[Possmguts]

Originally Posted by 67ChevyRedneck

Click the link below the pic. That's the build thread with more pics (not my truck so I don't have more pics).

Good Lord! I was just looking to see how he did the bumpers and came back with a life time of wet dreams!

[Andy4639]

This is mine. Not as modified as some but it is differant and it's a one of a kind.

If the Camaro front end is grafted on to the truck it will take a lot of modifications to the radiator support and front end.

[Possmguts]

Originally Posted by Andy4639

This is mine. Not as modified as some but it is differant and it's a one of a kind.

If the Camaro front end is grafted on to the truck it will take a lot of modifications to the radiator support and front end.

Not the whole front end.. just the valance. Im thinking it can be cut and grafted to a roll pan and fit the same. The spoiler should then fit like it does on the camaro with a couple brackets... maybe.

Nice truck by the way

[skorpioskorpio]

Andy,
Your air dam is from an '88ish truck isn't it?

[no1udknow]

Ive seen this photochop a few times... i think it looks awesome..

[CG]

Originally Posted by no1udknow

Ive seen this photochop a few times... i think it looks awesome..

Hey that's the one I did ages ago ... right click save ... thanks!

[no1udknow]

Originally Posted by CG

Hey that's the one I did ages ago ... right click save ... thanks!

Yup... comes up on google

[skorpioskorpio]

Originally Posted by no1udknow

Ive seen this photochop a few times... i think it looks awesome..

It does look awesome.....but it also looks like an S10 scale truck, and it isn't. Those hide away doors would be the size of a Frisbee, a C10 is getting close to a foot wider than a first gen Camaro so all that stuff would be giant scale and not simply stretched Camaro pieces. Not to say it couldn't be done, but it would all need to be fabbed from scratch I think.

[CG]

Originally Posted by skorpioskorpio

It does look awesome.....but it also looks like an S10 scale truck, and it isn't. Those hide away doors would be the size of a Frisbee, a C10 is getting close to a foot wider than a first gen Camaro so all that stuff would be giant scale and not simply stretched Camaro pieces. Not to say it couldn't be done, but it would all need to be fabbed from scratch I think.

Yeah, I was just goofing around with Photoshop. Definitely much easier than doing it in real life lol

[Andy4639]

I'm a big Camaro lover too! That would be a nice ride done correctly. I would love to have my 2 favorite vehicles rolled into one.

[Possmguts]

Originally Posted by Andy4639

I'm a big Camaro lover too! That would be a nice ride done correctly. I would love to have my 2 favorite vehicles rolled into one.

I dont see the "Scaled S-10" look in this.... I IS sweet... but Im gonna stick with everything under the grill. Havnt fully decided on the bumper yet or not.