|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
11-28-2014, 07:13 PM
|
#1 |
|
Registered User
 Join Date: Sep 2003
Location: Omaha,Ne
Posts: 108
|
Vintage Air bracket question Alan Grove 142R
Getting my parts list together for the next LS swap I will be doing in the 72 Suburban and I would like to keep the a/c compressor down low and tucked. I will be using the Sanden compressor and I am trying to see if anybody has pictures or can tell me if the Alan Grove lower truck bracket (142R) works. Any help would be appreciated.
|
|
|
|
12-06-2014, 07:50 PM
|
#2 |
|
Registered User
Join Date: Dec 2006
Location: Midlothian, TX
Posts: 87
|
Re: Vintage Air bracket question Alan Grove 142R
I've also been curious about this. What's their return policy?
|
|
|
|
|
12-07-2014, 11:59 PM
|
#3 |
|
Registered User
Join Date: Aug 2014
Location: Honolulu
Posts: 57
|
Re: Vintage Air bracket question Alan Grove 142R
It fits but, it's tight. Depending on your adapter plate and motor mounts, you need to make sure it won't hit the back of the compressor. These pics are from Alan Grove. I'll try to get pics later from my truck. You also need to order the right offset mount to line up with the crank pulley.
http://s1353.photobucket.com/user/80...72c43.jpg.html http://s1353.photobucket.com/user/80...efb77.jpg.html |
|
|
|
|
12-08-2014, 10:45 PM
|
#4 |
|
Registered User
Join Date: Aug 2014
Location: Honolulu
Posts: 57
|
Re: Vintage Air bracket question Alan Grove 142R
You can see how tight it is, but it fits.
http://i1353.photobucket.com/albums/...psfe0cd84c.jpg http://i1353.photobucket.com/albums/...psbaf25b5e.jpg |
|
|
|
|
12-09-2014, 10:06 AM
|
#5 |
|
Registered User
Join Date: Oct 2006
Location: bridgecreek ok.
Posts: 1,214
|
Re: Vintage Air bracket question Alan Grove 142R
will this bracket work with the dirty dingo sliders?
__________________
http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81 |
|
|
|
|
12-09-2014, 11:20 AM
|
#6 |
|
Registered User
Join Date: Aug 2014
Location: Honolulu
Posts: 57
|
Re: Vintage Air bracket question Alan Grove 142R
I would think it would, I'm using the factory stands and adapter plates that put mounts a little forward.
|
|
|
|
|
01-26-2017, 03:27 PM
|
#7 |
|
Registered User
Join Date: Nov 2011
Location: Williamsburg, VA
Posts: 960
|
Re: Vintage Air bracket question Alan Grove 142R
Reviving an old thread. How did things work out with your lines clearing?
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
