TN Odds & ends - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968vetL-71 · 12-06-2014, 10:55 AM

Some leftover spare parts from my crew build i won't be using.

81-91 1 ton 4x4 engine crossmember - 75.00

81-83 C20 4spd bolt in High hump tunnel - 30.00 SOLD

Hydraulic clutch reservoir bracket - 25.00

4l80 auto trans linkage out of 91 crew cab - 50.00

Very nice 89-91 Grey Suburban overhead console with mounting bracket - 100.00

Bucket seat brackets/tabs factory spot welded to floor - 35.00 SOLD

14 bolt 4.10 Ring n Pinion used - 50.00 SOLD

1968vetL-71 · 12-06-2014, 11:00 AM

overhead console, 4l80 linkage, bucket brackets

1968vetL-71 · 12-07-2014, 04:42 PM

pics of engine crossmember and bolt in hump per interest.

GRADYS Performance · 01-06-2015, 03:33 PM

Quote:

Originally Posted by 1968vetL-71

overhead console, 4l80 linkage, bucket brackets

Do you have the frame bracket for the 4L80 linkage?

1968vetL-71 · 01-07-2015, 10:30 PM

It's still on the truck.

GRADYS Performance · 01-08-2015, 10:14 AM

Quote:

Originally Posted by 1968vetL-71

It's still on the truck.

Is it being used , Or is it available?

1968vetL-71 · 01-10-2015, 01:42 PM

I'll do $75.00 with the frame bracket. I will have to take it off which will be a few days for sure. I believe i've sent you pics of this a while back. thx.

Oldriginal86 · 12-14-2014, 05:40 PM

Interested in the floor hump. Shipping to Md. 21122

RUN GMC · 12-14-2014, 08:44 PM

what does it take to mount the over head counsel in an 87 GMC?

RUN GMC · 12-14-2014, 08:47 PM

Quote:

Originally Posted by RUN GMC

what does it take to mount the over head counsel in an 87 GMC?

let me retry that....what comes with it to mount it to the roof.......

1968vetL-71 · 12-15-2014, 12:06 AM

Pm's sent.

Thx

bigblock73 · 12-15-2014, 10:20 PM

Quote:

Originally Posted by RUN GMC

what does it take to mount the over head counsel in an 87 GMC?

From the factory, the console mounts to a steel bracket that is spot welded to the roof supports.

1968vetL-71 · 12-16-2014, 08:40 AM

bigblock73- thx for info

As my PM stated, the factory bracket is included with the wiring pigtail.

thx

1968vetL-71 · 12-17-2014, 08:24 AM

bucket seat brackets - Sold payment pending
Floor hump - Sold- payment pending

Thx guys!

**Dads79GMC** · 12-15-2014, 11:43 AM

Will you take a money order for the brackets? Is so, I'll take them. Thanks Mike

1968vetL-71 · 12-15-2014, 02:05 PM

Bucket seat brackets? Yes, money order is fine.

**Dads79GMC** · 12-15-2014, 07:22 PM

Sorry, yes, bucket seat brackets. Also, shipping to 50131? Thanks Mike

sc85k-10 · 12-17-2014, 06:19 PM

Interested in the floor hump shipped to 29431 PayPal?

sc85k-10 · 12-17-2014, 06:20 PM

Sorry didn't see it sold

1968vetL-71 · 12-17-2014, 06:56 PM

Payment pending on floor hump. I'll let u know if something changes. Thx.

Oldriginal86 · 12-21-2014, 12:56 PM

Pm sent. Sorry for the delay

1968vetL-71 · 01-02-2015, 11:02 PM

Parts sold update at top.

Thx mike for payment.

Oldriginal86 · 01-21-2015, 09:20 PM

Received the floor hump. In great shape.
Thanks, Oldriginal86

12-06-2014, 10:55 AM	#1
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Odds & ends Some leftover spare parts from my crew build i won't be using. 81-91 1 ton 4x4 engine crossmember - 75.00 81-83 C20 4spd bolt in High hump tunnel - 30.00 SOLD Hydraulic clutch reservoir bracket - 25.00 4l80 auto trans linkage out of 91 crew cab - 50.00 Very nice 89-91 Grey Suburban overhead console with mounting bracket - 100.00 Bucket seat brackets/tabs factory spot welded to floor - 35.00 SOLD 14 bolt 4.10 Ring n Pinion used - 50.00 SOLD __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. Last edited by 1968vetL-71; 01-05-2015 at 08:53 AM.

12-06-2014, 11:00 AM	#2
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends overhead console, 4l80 linkage, bucket brackets Attached Images __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-07-2014, 04:42 PM	#3
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends pics of engine crossmember and bolt in hump per interest. Attached Images __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

01-07-2015, 10:30 PM	#5
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends It's still on the truck. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

01-10-2015, 01:42 PM	#7
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends I'll do $75.00 with the frame bracket. I will have to take it off which will be a few days for sure. I believe i've sent you pics of this a while back. thx. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-14-2014, 05:40 PM	#8
Oldriginal86 Registered User Join Date: Apr 2013 Location: Pasadena, Maryland Posts: 160	Re: Odds & ends Interested in the floor hump. Shipping to Md. 21122

12-14-2014, 08:44 PM	#9
RUN GMC Registered User Join Date: May 2014 Location: North AL Posts: 363	Re: Odds & ends what does it take to mount the over head counsel in an 87 GMC? __________________ http://i204.photobucket.com/albums/b...baae5d9a7e.jpg

12-15-2014, 12:06 AM	#11
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends Pm's sent. Thx __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-16-2014, 08:40 AM	#13
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends bigblock73- thx for info As my PM stated, the factory bracket is included with the wiring pigtail. thx __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-17-2014, 08:24 AM	#14
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends bucket seat brackets - Sold payment pending Floor hump - Sold- payment pending Thx guys! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-15-2014, 11:43 AM	#15
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: Odds & ends Will you take a money order for the brackets? Is so, I'll take them. Thanks Mike __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

12-15-2014, 02:05 PM	#16
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends Bucket seat brackets? Yes, money order is fine. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-15-2014, 07:22 PM	#17
Dads79GMC Senior Member Join Date: Feb 2008 Location: Des Moines, Iowa Posts: 1,238	Re: Odds & ends Sorry, yes, bucket seat brackets. Also, shipping to 50131? Thanks Mike __________________ Instagram @HomeBuiltC10s Dads 79 GMC Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=642929 1978 Silverado Build http://67-72chevytrucks.com/vboard/s...d.php?t=756016

12-17-2014, 06:19 PM	#18
sc85k-10 Registered User Join Date: Nov 2010 Location: Bonneau,SC Posts: 65	Re: Odds & ends Interested in the floor hump shipped to 29431 PayPal?

12-17-2014, 06:20 PM	#19
sc85k-10 Registered User Join Date: Nov 2010 Location: Bonneau,SC Posts: 65	Re: Odds & ends Sorry didn't see it sold



Register or Log In To remove these advertisements.

12-17-2014, 06:56 PM	#20
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends Payment pending on floor hump. I'll let u know if something changes. Thx. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-21-2014, 12:56 PM	#21
Oldriginal86 Registered User Join Date: Apr 2013 Location: Pasadena, Maryland Posts: 160	Re: Odds & ends Pm sent. Sorry for the delay

01-02-2015, 11:02 PM	#22
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Odds & ends Parts sold update at top. Thx mike for payment. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. Last edited by 1968vetL-71; 01-03-2015 at 12:32 PM.

01-21-2015, 09:20 PM	#23
Oldriginal86 Registered User Join Date: Apr 2013 Location: Pasadena, Maryland Posts: 160	Re: Odds & ends Received the floor hump. In great shape. Thanks, Oldriginal86

Register or Log In To remove these advertisements.