IA WTB 700R4 and 1 piece driveshaft for 12 bolt rear in Des Moines, IA area

[bnoon]

Looking for a core to rebuild. $100-$150

Also will need one piece driveshaft for 12 bolt rear (with 350 trans slip yoke).

[RatPoweredTruck]

I have a 27spline converter 3K stall 10" if you are interested. Fits pre85 700r4.

[gmachinz]

As for the driveshaft, why not just call Certified Power train and have them make you one? I have dealt with them for about 18 years now-great service and they know their stuff! You will need to measure u-joint cup center to center and give them that length. When you find a trans, get a hold of me-I deal with a retired trans tech guy with about 45 years of expereince-he builds the majority of the local street/strip guys transmissions around here and a very cool old guy! If you wondering, I always go to some of the older guys for custom rebuilds and such-experience is something you can buy!

[bnoon]

Originally Posted by gmachinz

As for the driveshaft, why not just call Certified Power train and have them make you one? I have dealt with them for about 18 years now-great service and they know their stuff! You will need to measure u-joint cup center to center and give them that length. When you find a trans, get a hold of me-I deal with a retired trans tech guy with about 45 years of expereince-he builds the majority of the local street/strip guys transmissions around here and a very cool old guy! If you wondering, I always go to some of the older guys for custom rebuilds and such-experience is something you can buy!

Because I don't need a custom driveshaft, I just need a stock one from a slip yoke th350 trans truck since I have a th400 two piece. It's a bolt in with a 700r4 or 4l60/65.

[65truckowner]

I have a one piece drive shaft out of a 76 chevy two wheel drive. It has the 12 bolt rearend and the turbo 350 transmission. What is your zip?

[bnoon]

Originally Posted by 65truckowner

i have a one piece drive shaft out of a 76 chevy two wheel drive. It has the 12 bolt rearend and the turbo 350 transmission. What is your zip?

50320

[65truckowner]

I forgot to ask, did you need one for a long bed or short. Mine is for a long bed truck

[bnoon]

long bed

[65truckowner]

How about 100 shipped

[bnoon]

I'll think on it a bit.

[65truckowner]

Sounds good just let me know and I will send it your way

[Dads79GMC]

Bnoon. I have one, come get it. Came out of my 1979 GMC Heavy Half LWB, I'll never use it. I'll take $1,000,000 for it!!!! Was connected to a 350 trans and 12 bolt. Been sitting in my barn for years. Almost tossed it last summer. Consider it a gift until......you have something I need. Hahahahaha! Mike

[bnoon]

Bnoon likes ^this^ post!