GA parting out 79 K-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

roundhouse · 01-10-2015, 10:56 PM

In Atlanta

frame, no rust. $100
TH-350 $75
NP-205 fixed yoke $275
driveshafts, $50
sliding back window $40
seat belts (blue )$30
non tilt column for manual transmission $50
tailgate $50

door glass $20
window regulators $20 each
windshield $40
grill $50
core support $100

3/4 ton 8 lug 14 bolt Full Floater 3.73 posi $400
3/4 ton 10 bolt front 8 lug 3.73 open $300
more parts avail

clutch & brake pedal assy $50
gauge cluster $40
dash trim black $20

bedliner $30

will cut patch panels but has usual rust in floor and cab corners and rockers,
bed is good except for right behind wheels

Im looking for stepside roll bar !

Chaplain · 01-11-2015, 03:47 AM

Passenger door manual window regulator?

roundhouse · 01-11-2015, 11:02 AM

Quote:

Originally Posted by Chaplain

Passenger door manual window regulator?

$20 plus shipping

roundhouse · 01-11-2015, 05:23 PM

Quote:

Originally Posted by Chaplain

Passenger door manual window regulator?

the regulator works ok, but the splines on the shaft are chewed up

so its probably scrap, unless you want to swap the shafts,

Ive done that before, but its a pain,
I did it just so I could use 1982 door panels on a 73 door
the 73 door had the short shaft and the 1973 only really small rollers in the tracks

roundhouse · 01-11-2015, 05:29 PM

back window,

just noticed its missing one of metal edges on each of the sliders
look close you can see whats missing.

roundhouse · 01-11-2015, 05:34 PM

tailgate is rust free,
one small ding on bottom edge.

some screw holes from bedliner

**old Rusty C10** · 01-11-2015, 10:32 AM

I need all the springs from the clutch linkage on the bottom and the two springs that are under the dash board for the clutch pedal return. Also if the on air conditioning selector switch is good give e a price for that too all is shipped to 07731

roundhouse · 01-11-2015, 11:06 AM

Quote:

Originally Posted by old Rusty C10

I need all the springs from the clutch linkage on the bottom and the two springs that are under the dash board for the clutch pedal return. Also if the on air conditioning selector switch is good give e a price for that too all is shipped to 07731

Like to sell the pedal assembly whole

Think I have the spring from the linkage under neath the truck
Gotta check
Think AC switch is already gone

roundhouse · 01-13-2015, 10:16 PM

Quote:

Originally Posted by old Rusty C10

I need all the springs from the clutch linkage on the bottom and the two springs that are under the dash board for the clutch pedal return. Also if the on air conditioning selector switch is good give e a price for that too all is shipped to 07731

A/C controls are still there,

79 Silverado/454 · 01-11-2015, 12:15 PM

Is the sliding back window a factory window ? If so I would be interested and would like to see pics.

roundhouse · 01-11-2015, 01:50 PM

Quote:

Originally Posted by 79 Silverado/454

Is the sliding back window a factory window ? If so I would be interested and would like to see pics.

I think so
Its different than the one in my 77
I will post up pics soon

**old Rusty C10** · 01-11-2015, 04:34 PM

If you include the both springs theres one that is attached from the clutch pedal to the top of the pedal assembly and another that is attached from the pedal to the bottom of the pedal assembly near the dash and steering column I will gladly buy the whole assembly . I assume this is NOT a hydraulic clutch upgrade

Chaplain · 01-11-2015, 05:05 PM

Quote:

Originally Posted by roundhouse

$20 plus shipping

PM sent

roundhouse · 01-11-2015, 05:20 PM

Quote:

Originally Posted by old Rusty C10

If you include the both springs theres one that is attached from the clutch pedal to the top of the pedal assembly and another that is attached from the pedal to the bottom of the pedal assembly near the dash and steering column I will gladly buy the whole assembly . I assume this is NOT a hydraulic clutch upgrade

stand by let me count the springs.

I converted the linkage in my driver to hydraulic so I could swap in a NV3500 and we had to cut the spring off,

roundhouse · 01-11-2015, 06:04 PM

Quote:

Originally Posted by old Rusty C10

If you include the both springs theres one that is attached from the clutch pedal to the top of the pedal assembly and another that is attached from the pedal to the bottom of the pedal assembly near the dash and steering column I will gladly buy the whole assembly . I assume this is NOT a hydraulic clutch upgrade

This the springs you want?

**old Rusty C10** · 01-11-2015, 08:39 PM

YES I really only need the thinner one but I will buy the whole thing if you want I also need all the ones for the Z bar underneath

roundhouse · 01-11-2015, 09:24 PM

Quote:

Originally Posted by old Rusty C10

YES I really only need the thinner one but I will buy the whole thing if you want I also need all the ones for the Z bar underneath

Ok think I have that one too
lemme check

UKNOWME · 01-11-2015, 09:32 PM

Can I see a pic of the guage cluster?

roundhouse · 01-11-2015, 11:35 PM

Quote:

Originally Posted by UKNOWME

Can I see a pic of the guage cluster?

pouring rain right now,
tomorrow maybe

roundhouse · 01-13-2015, 11:26 AM

Quote:

Originally Posted by UKNOWME

Can I see a pic of the guage cluster?

needles and gauge faces look good
think the clear cover will clean up,
but its kinda foggy
I will pull it off and wash it and see if the fog washes off

UKNOWME · 01-15-2015, 12:27 AM

Quote:

Originally Posted by roundhouse

needles and gauge faces look good
think the clear cover will clean up,
but its kinda foggy
I will pull it off and wash it and see if the fog washes off

Ok thanks.
Is the guage bezel in decent shape? Looks to be by the pic

roundhouse · 01-15-2015, 02:05 PM

Quote:

Originally Posted by UKNOWME

Ok thanks.
Is the guage bezel in decent shape? Looks to be by the pic

top left corner is broken off

roundhouse · 01-15-2015, 02:16 PM

will get shipping quotes as soon as I can,
think Ive replied to all the PMs,

I have a regular 40 hr job, and its another rainy night in Georgia

I will get your parts out soon as I can.

Honestly I didnt expect as many responses,
figured most of this rig besides the axles and Tcase was going to the crusher,

even got someone that wants the back cab wall and back end of the bed and tailgate

I just wish Id bought a parts truck last year,
before I bought a new wiper motor & switch, new speedo cable, another gauge cluster, new door hinges, new window regulators, new clutch pedal assembly, new sliding back window, used drive shafts, used door panels and dash, new spindles and lockouts, etc etc

live and learn.

79 Silverado/454 · 01-11-2015, 10:38 PM

Thanks for posting the pic. of the sliding window. I would like to find one a little nicer with no missing parts.

**Willowrun** · 01-11-2015, 10:56 PM

How are the interior door panels?

01-10-2015, 10:56 PM	#1
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	parting out 79 K-10 In Atlanta frame, no rust. $100 TH-350 $75 NP-205 fixed yoke $275 driveshafts, $50 sliding back window $40 seat belts (blue )$30 non tilt column for manual transmission $50 tailgate $50 door glass $20 window regulators $20 each windshield $40 grill $50 core support $100 3/4 ton 8 lug 14 bolt Full Floater 3.73 posi $400 3/4 ton 10 bolt front 8 lug 3.73 open $300 more parts avail clutch & brake pedal assy $50 gauge cluster $40 dash trim black $20 bedliner $30 will cut patch panels but has usual rust in floor and cab corners and rockers, bed is good except for right behind wheels Im looking for stepside roll bar ! Last edited by roundhouse; 01-11-2015 at 06:36 PM.

01-11-2015, 03:47 AM	#2
Chaplain Registered User Join Date: Oct 2014 Location: TN Posts: 294	Re: parting out 79 K-10 Passenger door manual window regulator?

01-11-2015, 05:29 PM	#5
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	Re: parting out 79 K-10 back window, just noticed its missing one of metal edges on each of the sliders look close you can see whats missing. Attached Images

01-11-2015, 05:34 PM	#6
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	Re: parting out 79 K-10 tailgate is rust free, one small ding on bottom edge. some screw holes from bedliner Attached Images

01-11-2015, 10:32 AM	#7
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,326	Re: parting out 79 K-10 I need all the springs from the clutch linkage on the bottom and the two springs that are under the dash board for the clutch pedal return. Also if the on air conditioning selector switch is good give e a price for that too all is shipped to 07731 __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-11-2015, 12:15 PM	#10
79 Silverado/454 Registered User Join Date: Sep 2014 Location: SW, Ohio Posts: 150	Re: parting out 79 K-10 Is the sliding back window a factory window ? If so I would be interested and would like to see pics. __________________ 1979 C-10 Silverado SWB 454/400 Turbo 1987 GMC Jimmy Sierra Classic 2015 GMC Sierra SLT Z71 (Cayenne Metallic) 2018 GMC Denali HD Duramax (Red Quartz)

01-11-2015, 04:34 PM	#12
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,326	Re: parting out 79 K-10 If you include the both springs theres one that is attached from the clutch pedal to the top of the pedal assembly and another that is attached from the pedal to the bottom of the pedal assembly near the dash and steering column I will gladly buy the whole assembly . I assume this is NOT a hydraulic clutch upgrade __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-11-2015, 08:39 PM	#16
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,326	Re: parting out 79 K-10 YES I really only need the thinner one but I will buy the whole thing if you want I also need all the ones for the Z bar underneath __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

01-11-2015, 09:32 PM	#18
UKNOWME Registered User Join Date: Aug 2012 Location: Clovis, NM Posts: 2,705	Re: parting out 79 K-10 Can I see a pic of the guage cluster? __________________ 2018 Audi S5- wife's ride 1980 Chevy Scottsdale http://67-72chevytrucks.com/vboard/s...d.php?t=543511 1981 Chevy Silverado- in pieces 1964 Chevy c10 2017 Jeep Wrangler JKU

01-15-2015, 02:16 PM	#23
roundhouse Registered User Join Date: Apr 2014 Location: atlanta ga Posts: 91	Re: parting out 79 K-10 will get shipping quotes as soon as I can, think Ive replied to all the PMs, I have a regular 40 hr job, and its another rainy night in Georgia I will get your parts out soon as I can. Honestly I didnt expect as many responses, figured most of this rig besides the axles and Tcase was going to the crusher, even got someone that wants the back cab wall and back end of the bed and tailgate I just wish Id bought a parts truck last year, before I bought a new wiper motor & switch, new speedo cable, another gauge cluster, new door hinges, new window regulators, new clutch pedal assembly, new sliding back window, used drive shafts, used door panels and dash, new spindles and lockouts, etc etc live and learn.

01-11-2015, 10:38 PM	#24
79 Silverado/454 Registered User Join Date: Sep 2014 Location: SW, Ohio Posts: 150	Re: parting out 79 K-10 Thanks for posting the pic. of the sliding window. I would like to find one a little nicer with no missing parts. __________________ 1979 C-10 Silverado SWB 454/400 Turbo 1987 GMC Jimmy Sierra Classic 2015 GMC Sierra SLT Z71 (Cayenne Metallic) 2018 GMC Denali HD Duramax (Red Quartz)

01-11-2015, 10:56 PM	#25
Willowrun Senior Member Join Date: Mar 2013 Location: Ann Arbor, MI Posts: 1,032	Re: parting out 79 K-10 How are the interior door panels?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.