Door Bumpers

[Hugh in NC]

I see this door bumper listed for a '63. My truck does not have these bumpers. Should it have these bumpers, where do they go and how many per door? Can someone post a photo showing location?



Thanks for the help,
Hugh

[Andice]

Here is where they go on a '64 GMC

[Hugh in NC]

Thanks for the quick reply. I guess the previous owner filled the holes. I should be able to get them close enough from your photo.

Hugh

[jonzcustomshop]

on my 60, and 61 they are up here:

[AcampoDave]

My buddy's' 63 has no holes either.

[Micmac]

Nor does mine.

[spookylynx]

mine had the holes, but they were too small for the reproductions. It's no big deal, just drill some new ones and push them in.

[Andice]

The repros come in two sizes: one for big holes and one for small. My truck (a '64) uses the ones for the smaller holes.

[spookylynx]

Originally Posted by Andice

The repros come in two sizes: one for big holes and one for small. My truck (a '64) uses the ones for the smaller holes.

yup... at least from LMC the ones for 60-63 are the small ones and the ones for 64-66 are the big ones. Too bad my 65 had the small holes. But it was nothing a Step ream couldn't fix.

[61K10]

my 61 had no holes and weren't filled either. anybody really know about these?

[bhc41051]

x2 on LMC having the right ones, I think this is the ONLY thing they got right.

[1strong63]

my 63 do not have holes too and i don't feel that they have been filled. i very closely look and cannot see a welded/grind area.

[Hugh in NC]

I thought I had missing door bumpers but sounds like maybe not. I am in the middle of the Honda weatherstrip install and will wait until I finish and see how the doors close. My truck was made in Baltimore. I wonder if assembly plant determined if the truck had door bumpers?

Thanks for all the replies,
Hugh

[luvbowties]

Originally Posted by Hugh in NC

I thought I had missing door bumpers but sounds like maybe not. I am in the middle of the Honda weatherstrip install and will wait until I finish and see how the doors close. My truck was made in Baltimore. I wonder if assembly plant determined if the truck had door bumpers?

Thanks for all the replies,
Hugh

Pardon my hijack, but what's the reason for using Honda weather strip? For easier closing? Do they make door closing easier, from some of those who have used them, or is this new territory? Which Honda w-strips are the ones to use? Thanks for answers & info. Please report back how well they work. My pass door is fine, but my driver's door is a 'slammer', on a '66 sbss, & I highly dislike it!
Thanks,
Sam

[Jeff La]

Originally Posted by luvbowties

Pardon my hijack, but what's the reason for using Honda weather strip? For easier closing? Do they make door closing easier, from some of those who have used them, or is this new territory? Which Honda w-strips are the ones to use? Thanks for answers & info. Please report back how well they work. My pass door is fine, but my driver's door is a 'slammer', on a '66 sbss, & I highly dislike it!
Thanks,
Sam

Here's the full explanation http://67-72chevytrucks.com/vboard/s...d.php?t=617703

[63burban]

The "V" shaped guide in the door jamb below the latch takes care of the no bumper situation

[jonzcustomshop]

I took a look at a few of my trucks, looks like all the 63's did not have them, I have 3 chevs, and a gmc...
I have 1 60 with them, and 1 61 with them, and 2 61's without....(all chevys), and 1 61 gmc with...
I have a 66 gmc with none in the lower spot, and a 66 chev with them in the lower spot...

[65chevysub]

What's the easiest way to install the bumpers? I was thinking a mild soap and water solution or rubbing alcohol like when installing handlebar grips.

[63burban]

Spray glass cleaner around the hole and on the rubber and twist it in

[Micmac]

Back in the day when putting tight handlebar grips on my old Indians after a rebuild, I read somewhere to use hairspray, I tried it and it worked great. It was the old aerosol type. I am sure this would work with this application as well.