Angle plug headers that fit a 4wd?sbc - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cst 72 blazer · 02-26-2015, 11:07 PM

hey guys sorry in advance for a subject that has been beat to death. ive been doing some digging with not much success. anybody here have angle plug sbc heads on a 4x4 blazer with long tube headers? brand? part# . seems like most threads are 2wd and im concerned with front drive shaft problems.Thanks in advance for any input on the subject

cst 72 blazer · 03-05-2015, 06:30 PM

bump. anybody? shortys will work also

tjsblazer · 03-06-2015, 11:53 PM

I am using mid-length TriY type. I haven't completed but I test fit on AFR 195 heads with angle plugs. I tried Both Dougs and Doug Thorleys because they were less expensive but both had issues somewhere so I sent them back to Summit.

I got a set of Stan's out of Washington. I bought them in bare metal and ceramic coat locally. They are a little spendy but very well made. You could see the difference over the others I tried and fit well for me. Also had a nice big square port that didn't pinch the exhaust outlet on the AFR heads like the others did.
I think 172YB was the part number.

I talked to them on the phone. The shop foreman/supervisor (can't remember his name) is familiar with this era of truck.

My truck is a 72 4x4 Blazer

cst 72 blazer · 03-11-2015, 08:25 PM

thank you so much TJ ! got a set on order!

tjsblazer · 06-28-2015, 11:56 PM

Quote:

Originally Posted by cst 72 blazer

thank you so much TJ ! got a set on order!

Did you get your Headers in. Here is few pics of mine temp mounted now on the roller. I did have to clearance the top rail of the frame but that is because my Engine is moved 1 7/8" forward and it narrows a bit. I'm going to send them out now for Ceramic coat.

**Blazerowner** · 07-07-2015, 01:12 AM

I bought Doug's 372Y and they hit the rear spring shackle on the drivers side. $640 headers that don't fit.

**Blazerowner** · 07-07-2015, 12:25 PM

Just happened to notice this tag when packing these back up. Might explain a few things considering they are outsourcing.

tjsblazer · 07-07-2015, 09:13 PM

Quote:

Originally Posted by Blazerowner

Just happened to notice this tag when packing these back up. Might explain a few things considering they are outsourcing.

Yes, read the reply I just sent to your PM. You are not the first to have Front shackle issues either. I have seen a Blazer in the Restoration forum with the same issue.

02-26-2015, 11:07 PM	#1
cst 72 blazer Registered User Join Date: Mar 2012 Location: Toano , VA Posts: 96	Angle plug headers that fit a 4wd?sbc hey guys sorry in advance for a subject that has been beat to death. ive been doing some digging with not much success. anybody here have angle plug sbc heads on a 4x4 blazer with long tube headers? brand? part# . seems like most threads are 2wd and im concerned with front drive shaft problems.Thanks in advance for any input on the subject __________________ Chris Heinz

03-05-2015, 06:30 PM	#2
cst 72 blazer Registered User Join Date: Mar 2012 Location: Toano , VA Posts: 96	Re: Angle plug headers that fit a 4wd?sbc bump. anybody? shortys will work also __________________ Chris Heinz

03-06-2015, 11:53 PM	#3
tjsblazer Registered User Join Date: Oct 2009 Location: Great White North Posts: 1,520	Re: Angle plug headers that fit a 4wd?sbc I am using mid-length TriY type. I haven't completed but I test fit on AFR 195 heads with angle plugs. I tried Both Dougs and Doug Thorleys because they were less expensive but both had issues somewhere so I sent them back to Summit. I got a set of Stan's out of Washington. I bought them in bare metal and ceramic coat locally. They are a little spendy but very well made. You could see the difference over the others I tried and fit well for me. Also had a nice big square port that didn't pinch the exhaust outlet on the AFR heads like the others did. I think 172YB was the part number. I talked to them on the phone. The shop foreman/supervisor (can't remember his name) is familiar with this era of truck. My truck is a 72 4x4 Blazer __________________ Jeff. '72 Blazer K5 "Camshaft opinions are like belly buttons; everyone has one and no two are alike" My Blazer Build: http://67-72chevytrucks.com/vboard/s...d.php?t=626752 My Engine Build: http://67-72chevytrucks.com/vboard/s...d.php?t=637336 Last edited by tjsblazer; 03-07-2015 at 02:50 PM. Reason: vehicle type

03-11-2015, 08:25 PM	#4
cst 72 blazer Registered User Join Date: Mar 2012 Location: Toano , VA Posts: 96	Re: Angle plug headers that fit a 4wd?sbc thank you so much TJ ! got a set on order! __________________ Chris Heinz

07-07-2015, 01:12 AM	#6
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,956	Re: Angle plug headers that fit a 4wd?sbc I bought Doug's 372Y and they hit the rear spring shackle on the drivers side. $640 headers that don't fit. __________________ Kirk 72 Blazer CST 4wd highlander

07-07-2015, 12:25 PM	#7
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,956	Re: Angle plug headers that fit a 4wd?sbc Just happened to notice this tag when packing these back up. Might explain a few things considering they are outsourcing. Attached Images __________________ Kirk 72 Blazer CST 4wd highlander



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.