|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
02-28-2015, 06:09 AM
|
#1 |
|
It's alsways something.....
 
Join Date: Nov 2008
Location: Douglasville GA
Posts: 1,171
|
Need measurement on AD bed please
I have a 53 AD truck- Im working on donor rear diff and could use a measurement please. I have an S10 frame (just for info)
I don't have a bed yet.  What I plan to do put some tape marks on my shop floor and put my desired wheel/tire combo within the tape marks and determine the rear end width. So I need to know the measurement of the distance from the inside of the fender lip (where the outer side wall would scrub) to that same point on the other side. Or in other words, the maximum width of the differential with tires that would still fit inside the stock rear fenders. Make sense? Any help would be appreciated
__________________
1968 RS Camaro 'Vert Matching number 327 and M21 Muncie 1968 C10 Black with red interior and orig paint. 5.3 / 4l60e,3:73 POSI 17" Torq Thrusts 1968 CST 514 Red with black interior. Buddy Buckets, Factory A/C, PS, PB- 20" AR custom shop TT, 5.3 and 4l60e |
|
|
|
02-28-2015, 09:12 AM
|
#2 |
|
Registered User
Join Date: Apr 2009
Location: Waynesfield Ohio
Posts: 1,991
|
Re: Need measurement on AD bed please
The inside of the bed is 50" so if you set it at 51" or 52" to the inside of the tire you should be fine.
__________________
 1949 Five Window, 1973 Step Side, 2000 Z71 |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
