91 suburban interior into 77 c10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lowbucktrucks · 03-08-2015, 10:22 PM

I have a 91 suburban parts truck. The running gear is being swapped into a 69 c20. will the tilt column,seat belts, bucket seats and console work in my 77c10 longbed. also, will the late model wiper motor switch over so that i have intermittant wipers
Thanks for any help

lowbucktrucks · 03-09-2015, 09:23 PM

bump anybody at least know about wiper motor and/or column

Ziegelsteinfaust · 03-09-2015, 11:06 PM

From what I have read you have to use all the wiring to get the intermittent wipers, and swap the motor over too.

69heavychevy · 03-09-2015, 11:17 PM

It wont be a straight swap...wiper switch being on the column and being on the dash in your 77, bucket seats will require the inner front brackets being transferred from the burb to your c10...or you could fabricate your own. Its been done before, just search the web...

motornut · 03-10-2015, 09:55 AM

I'd watch the 77 steering box to 89 tilt,should need the lower (91)shaft.
But watch some use different size rag joints.
I've heard the wiper motor wiring is different after 78,
the seats ,prob just need new holes
my 89 seats fit into my 78,using 89 dash pad and door panels,glass etc too.
(I have an 88 tilt for it too)

lowbucktrucks · 03-10-2015, 06:29 PM

Thanks for help everybody
motornut is your 78 a truck or suburban??

motornut · 03-10-2015, 06:34 PM

Quote:

Originally Posted by lowbucktrucks

Thanks for help everybody
motornut is your 78 a truck or suburban??

Jimmy only now,
The 78 has glass fuses,told later 78s were made with blade fuses.
I've had a 78,87,88,89 Burbs before

03-08-2015, 10:22 PM	#1
lowbucktrucks Registered User Join Date: Dec 2014 Location: Buck creek, sc Posts: 90	91 suburban interior into 77 c10 I have a 91 suburban parts truck. The running gear is being swapped into a 69 c20. will the tilt column,seat belts, bucket seats and console work in my 77c10 longbed. also, will the late model wiper motor switch over so that i have intermittant wipers Thanks for any help Last edited by lowbucktrucks; 03-08-2015 at 10:51 PM.

03-09-2015, 09:23 PM	#2
lowbucktrucks Registered User Join Date: Dec 2014 Location: Buck creek, sc Posts: 90	Re: 91 suburban interior into 77 c10 bump anybody at least know about wiper motor and/or column

03-09-2015, 11:06 PM	#3
Ziegelsteinfaust Registered User Join Date: Dec 2012 Location: Temple City Posts: 3,640	Re: 91 suburban interior into 77 c10 From what I have read you have to use all the wiring to get the intermittent wipers, and swap the motor over too.

03-09-2015, 11:17 PM	#4
69heavychevy Registered User Join Date: Jan 2007 Location: Garland,TX Posts: 431	Re: 91 suburban interior into 77 c10 It wont be a straight swap...wiper switch being on the column and being on the dash in your 77, bucket seats will require the inner front brackets being transferred from the burb to your c10...or you could fabricate your own. Its been done before, just search the web... __________________ 80 C10 SWB Step Side - 350 w/ vortec heads, TH350, 12-bolt 3.73

03-10-2015, 09:55 AM	#5
motornut 78K & 79C Jimmys Join Date: Nov 2009 Location: Ottawa Ont CANADA Posts: 7,901	Re: 91 suburban interior into 77 c10 I'd watch the 77 steering box to 89 tilt,should need the lower (91)shaft. But watch some use different size rag joints. I've heard the wiper motor wiring is different after 78, the seats ,prob just need new holes my 89 seats fit into my 78,using 89 dash pad and door panels,glass etc too. (I have an 88 tilt for it too) Attached Images __________________ John 1978 GMCJimmy4X4-350/203 1979 GMCJimmy4X2-305/350

03-10-2015, 06:29 PM	#6
lowbucktrucks Registered User Join Date: Dec 2014 Location: Buck creek, sc Posts: 90	Re: 91 suburban interior into 77 c10 Thanks for help everybody motornut is your 78 a truck or suburban??



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.