parting out 60-66trucks, burb,panels - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*rinco* · 08-30-2003, 11:26 AM

i'm parting out a few 60-66 chevy and gmc trucks,suburbans,and panels. burb seats, side glass barn doors,cabs,fenders ft and rear,chrome&painted grills,hoods doors. everything you need for a 60-66 trucks,burb,panel.no thanks Rich

jon_volk · 08-30-2003, 05:16 PM

hey, got a complete metal dash out of a 60-63? pics? price? shipping to 06460?

thanks.

d c wiley · 09-14-2003, 12:55 AM

do you have front turn signal assemblies for a 65 gmc

busdriver177 · 09-28-2003, 06:32 PM

Do you have a choke cable and heater cable assembly.

NAPCO ken · 10-01-2003, 06:59 PM

I need the driver's side prop rod for the rear liftgate for a '64 Suburban, the one that locks the gate up. Let me know if you have one. Thanks.

Iron-Butt · 10-10-2003, 11:20 PM

Looking for v8 tower mounts

pugs · 10-20-2003, 05:20 PM

hey do you have any decent front fenders and of so price? Pugs

rodnok1 · 10-27-2003, 05:10 PM

do you have rear barn doors for 64 panel?

ClAsSiC_nUT · 11-12-2003, 04:53 AM

I,m looking for a set of seats and an insrutment cluster for a 65 suburban

slipknot153110 · 11-13-2003, 03:23 PM

i need a 65 gmc bed ...how much?

yt500pmd · 12-03-2003, 01:26 AM

looking for 1960 spindles

67steptx · 12-16-2003, 10:43 PM

Do you have a hood for a 64?

groundflyer · 12-17-2003, 06:51 PM

RADIO KNOBS AND SHIPPING TO 76082 THANKS

cochran63 · 01-16-2004, 12:56 AM

i am looking for a good front bumper for a 63-66 and a set of front fenders. How much?

rich62step · 01-22-2004, 10:28 AM

Do you have a straight grill assembly, chrome 62 1/2 ton pickup?

Lgriffin · 01-23-2004, 12:48 AM

Need a power steering ram for a 65 C10.

Larry

funkzilla · 01-23-2004, 01:49 AM

Do you still have doors available, and if so, how much are you asking for? What part of Colorado are you in?

funkzilla · 01-23-2004, 01:51 AM

Do you have a bench seat available?

cochran63 · 02-06-2004, 10:44 PM

did you ever find a front bumper? Im looking for a painted bumper.

1Bad62Pro/Street · 08-04-2004, 10:13 PM

I am looking for a 62 chrome grill in good condition. Also I need some good doors from a 60-63. RUST FREE!

bobclem · 02-07-2004, 07:10 PM

looking for rear bumper for 66 ( painted ) and brackets, how much + shipping to 64114

nevada70chev · 02-13-2004, 02:34 PM

hey guys, not sure on the protocol of this, but i've got some pics on a new post of cabs / trucks i can pull parts from, post will be "FS PICS of 60-66'S", no offense rinco

droped65burb · 02-19-2004, 06:08 AM

im lookin for the top tailgate hinge and licence plate frame email at droped49&aol.com thanks ralf

truckman32 · 03-09-2004, 10:15 PM

why don't you post some pictures of your parts

droped65burb · 03-10-2004, 04:06 AM

nope did not get the parts list sorry. email to me again please at droped49@aol.com thANKS (65 CHEVY SUBURBAN TOP TAILGATE HINGES)

08-30-2003, 11:26 AM	#1
rinco Account Suspended Join Date: Jun 2003 Location: Colorado Posts: 18	parting out 60-66trucks, burb,panels i'm parting out a few 60-66 chevy and gmc trucks,suburbans,and panels. burb seats, side glass barn doors,cabs,fenders ft and rear,chrome&painted grills,hoods doors. everything you need for a 60-66 trucks,burb,panel.no thanks Rich

10-01-2003, 06:59 PM	#5
NAPCO ken Registered User Join Date: Aug 2001 Location: anaheim, ca Posts: 187	I need the driver's side prop rod for the rear liftgate for a '64 Suburban, the one that locks the gate up. Let me know if you have one. Thanks. __________________ ken '58 Chev NAPCO 4x4 short '60 GMC Suburban 4x4, restored '60 GMC 3/4T stepside 4x4 '64 GMC Suburban 4x4, restored '90 Chev Suburban 4x4, dually, ZZ502 '77 GMC Suburban 4x4, one ton axles, 12" lift, 39.5"s '88 Chevy crewcab dually 4x4, 10" lift, 42"s (x6!) '03 Jeep Wrangler Rubicon '79 Chev 3/4 Suburban 4x4, 400-400-203

10-10-2003, 11:20 PM	#6
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Looking for v8 tower mounts __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.

10-20-2003, 05:20 PM	#7
pugs Registered User Join Date: Mar 2003 Location: Hamburg Pa Posts: 1,153	parts for sale hey do you have any decent front fenders and of so price? Pugs __________________ I don't do thing cuz I can, I do it cuz someone told me it couldn't be done...

10-27-2003, 05:10 PM	#8
rodnok1 Registered User Join Date: Jun 2003 Location: Linden, North Carolina Posts: 617	do you have rear barn doors for 64 panel? __________________ 64 Panel Rebuild Pics Clutch Replacement and Borg Warner T10 Trans Rebuild 64 Panel 1/2 Ton 350cubes/400hp BorgWarner t-10 3:73 Auburn Posi

08-30-2003, 05:16 PM	#2
jon_volk Registered User Join Date: Mar 2003 Location: Milford, CT Posts: 242	hey, got a complete metal dash out of a 60-63? pics? price? shipping to 06460? thanks.

09-14-2003, 12:55 AM	#3
d c wiley Registered User Join Date: Sep 2003 Location: IL Posts: 2	do you have front turn signal assemblies for a 65 gmc

09-28-2003, 06:32 PM	#4
busdriver177 Registered User Join Date: Sep 2003 Posts: 4	Do you have a choke cable and heater cable assembly.

11-12-2003, 04:53 AM	#9
ClAsSiC_nUT Registered User Join Date: Nov 2003 Location: Phoenix, AZ Posts: 39	I,m looking for a set of seats and an insrutment cluster for a 65 suburban

11-13-2003, 03:23 PM	#10
slipknot153110 Registered User Join Date: Nov 2003 Location: canby oregon Posts: 9	i need a 65 gmc bed ...how much?

12-03-2003, 01:26 AM	#11
yt500pmd Registered User Join Date: Sep 2002 Location: albuquerque Posts: 97	looking for 1960 spindles __________________ 1995 1500 Ext cab 5.7 automatic

12-16-2003, 10:43 PM	#12
67steptx Registered User Join Date: Mar 2003 Location: Rockport, Tx Posts: 3	hood Do you have a hood for a 64?

12-17-2003, 06:51 PM	#13
groundflyer Registered User Join Date: Sep 2002 Location: Texas 76082 Posts: 35	RADIO KNOBS AND SHIPPING TO 76082 THANKS

01-16-2004, 12:56 AM	#14
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	i am looking for a good front bumper for a 63-66 and a set of front fenders. How much? __________________ Youth soon passes away, but immaturity can last a life time.

01-22-2004, 10:28 AM	#15
rich62step Registered User Join Date: Jan 2004 Posts: 9	Do you have a straight grill assembly, chrome 62 1/2 ton pickup?



Register or Log In To remove these advertisements.

01-23-2004, 12:48 AM	#16
Lgriffin Registered User Join Date: Jan 2004 Location: Oakdale, CA Posts: 101	Need a power steering ram for a 65 C10. Larry

01-23-2004, 01:49 AM	#17
funkzilla Registered User Join Date: Oct 2003 Location: Tucson, AZ Posts: 40	Parts? Do you still have doors available, and if so, how much are you asking for? What part of Colorado are you in?

01-23-2004, 01:51 AM	#18
funkzilla Registered User Join Date: Oct 2003 Location: Tucson, AZ Posts: 40	Bench seat? Do you have a bench seat available?

02-06-2004, 10:44 PM	#19
cochran63 Registered User Join Date: Jan 2004 Location: Oklahoma Posts: 1,057	did you ever find a front bumper? Im looking for a painted bumper. __________________ Youth soon passes away, but immaturity can last a life time.

08-04-2004, 10:13 PM	#20
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Need some parts I am looking for a 62 chrome grill in good condition. Also I need some good doors from a 60-63. RUST FREE! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

02-07-2004, 07:10 PM	#21
bobclem Registered User Join Date: Feb 2004 Location: kansas city Posts: 8	looking for rear bumper for 66 ( painted ) and brackets, how much + shipping to 64114

02-13-2004, 02:34 PM	#22
nevada70chev Registered User Join Date: Jul 2001 Location: reno, nv Posts: 646	FS Parts.... hey guys, not sure on the protocol of this, but i've got some pics on a new post of cabs / trucks i can pull parts from, post will be "FS PICS of 60-66'S", no offense rinco __________________ 70 LWB, 350/350 A/C, P/S, 3 Tone Paint (white cap, primer gray with black guide coat)

02-19-2004, 06:08 AM	#23
droped65burb Registered User Join Date: Feb 2004 Posts: 4	im lookin for the top tailgate hinge and licence plate frame email at droped49&aol.com thanks ralf

03-09-2004, 10:15 PM	#24
truckman32 AND HOLDING ON TO THE C10 Join Date: Jan 2003 Location: MT.STERLING,KY Posts: 390	why don't you post some pictures of your parts __________________ 66 swb/ss chevy c10 SOLD 62 swb/fs chevy c10 :p SOLD 84 swb/fs chevy c10 91 sdime 383/th350

03-10-2004, 04:06 AM	#25
droped65burb Registered User Join Date: Feb 2004 Posts: 4	nope did not get the parts list sorry. email to me again please at droped49@aol.com thANKS (65 CHEVY SUBURBAN TOP TAILGATE HINGES)

Register or Log In To remove these advertisements.