New Motor, A/C comp. don't fit - The 1947 - Present Chevrolet & GMC Truck Message Board Network

85/Silverado · 05-01-2015, 10:32 PM

My new motors valve covers won't let my A/C compressor fit back on the drivers side mount. The old covers won't fit back on with the oversize rockers.
Does anyone know which March serpentine setup will fit the 85 Silverado small block with the long water pump? I want the whole set-up with Chrome A/C unit, Power Steering Pump, Alternator, and the Fan Blades will still fit.?

I know it's over 2 grand but I'm tired of getting screwed around by everyone that works on my Truck.

Or some bracket that will allow me to hook up the old A/C unit to a different spot?

Thanks Guys
Jack
Yes I'm still working on the engine.....

85/Silverado · 05-03-2015, 02:24 PM

I'm surprised no one has put a serpentine belt system on there 350.

geezer#99 · 05-03-2015, 02:32 PM

Have you seen these brackets!
http://www.alangrovecomponents.com/Catalog.htm

What are you going to use for a pcv system?

85/Silverado · 05-03-2015, 03:09 PM

I have the Caps for both covers just haven't drilled the holes for them till I have everything fitted to the engine. Thanks for the Link, but I want the whole March serpentine system. I was just wondering If I have to switch the engine to a short water pump now. March is limited on Long water pump systems. And I think they turn the pump backwards from my engine. I just have to call them tomorrow I guess.

85/Silverado · 05-05-2015, 11:42 AM

Ok, I finally figured out what Serpentine System I needed and Ordered ( March Style Track #21155 )
Does any one know how to tell which Goodyear Gatorback Belt (By there numbering system) a 64" belt is , so I can order one online?
Thanks

05-01-2015, 10:32 PM	#1
85/Silverado Registered User Join Date: Nov 2011 Location: Port St. Joe Fl. Posts: 494	New Motor, A/C comp. don't fit My new motors valve covers won't let my A/C compressor fit back on the drivers side mount. The old covers won't fit back on with the oversize rockers. Does anyone know which March serpentine setup will fit the 85 Silverado small block with the long water pump? I want the whole set-up with Chrome A/C unit, Power Steering Pump, Alternator, and the Fan Blades will still fit.? I know it's over 2 grand but I'm tired of getting screwed around by everyone that works on my Truck. Or some bracket that will allow me to hook up the old A/C unit to a different spot? Thanks Guys Jack Yes I'm still working on the engine..... Attached Images

05-03-2015, 02:32 PM	#3
geezer#99 Registered User Join Date: Aug 2009 Location: Bowser Posts: 13,733	Re: New Motor, A/C comp. don't fit Have you seen these brackets! http://www.alangrovecomponents.com/Catalog.htm What are you going to use for a pcv system?

05-03-2015, 03:09 PM	#4
85/Silverado Registered User Join Date: Nov 2011 Location: Port St. Joe Fl. Posts: 494	Re: New Motor, A/C comp. don't fit I have the Caps for both covers just haven't drilled the holes for them till I have everything fitted to the engine. Thanks for the Link, but I want the whole March serpentine system. I was just wondering If I have to switch the engine to a short water pump now. March is limited on Long water pump systems. And I think they turn the pump backwards from my engine. I just have to call them tomorrow I guess.

05-05-2015, 11:42 AM	#5
85/Silverado Registered User Join Date: Nov 2011 Location: Port St. Joe Fl. Posts: 494	Re: New Motor, A/C comp. don't fit Ok, I finally figured out what Serpentine System I needed and Ordered ( March Style Track #21155 ) Does any one know how to tell which Goodyear Gatorback Belt (By there numbering system) a 64" belt is , so I can order one online? Thanks

05-03-2015, 02:24 PM	#2
85/Silverado Registered User Join Date: Nov 2011 Location: Port St. Joe Fl. Posts: 494	Re: New Motor, A/C comp. don't fit I'm surprised no one has put a serpentine belt system on there 350.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.