stepside bed question

[1968aj]

bought a swb stepside. the taillights were gone and I am trying to put stock taillights back on it. there are threaded holes for taillights and backup lights. anybody know what size the bolts are?cant find them in any catalogs. also do all bolts that hold bed to frame go through the wood or are there any other bolts that attach to frame?any help is appreciated.

[Dustytrix]

The bolts go thru wood and rails to hold it to the frame 4 in front and 4 in rear. My taillight bolts were replaced with self starters so I cant help you there.

[1968aj]

thanks . I got a new set of bed bolts just making sure that was all that held it on.

[Clatterville trolley]

Originally Posted by 1968aj

bought a swb stepside. the taillights were gone and I am trying to put stock taillights back on it. there are threaded holes for taillights and backup lights. anybody know what size the bolts are?cant find them in any catalogs. also do all bolts that hold bed to frame go through the wood or are there any other bolts that attach to frame?any help is appreciated.

I think that you will find that they are 3/8 bolts about 1 1/4" to 1 1/2" long they take a 9/16" wrench to remove if I remember correctly? I just took some off of a bed about two weeks ago. Hope this might help. Jay

[1968aj]

Originally Posted by Clatterville trolley

I think that you will find that they are 3/8 bolts about 1 1/4" to 1 1/2" long they take a 9/16" wrench to remove if I remember correctly? I just took some off of a bed about two weeks ago. Hope this might help. Jay

thanks im off to hardware store. I keep a bucket full of extra bolts in garage but never has what I am looking for.

[1968aj]

still trying to find out what kind of bolt holds the stock taillights on stepside bed. went to hardware store and nothing there will thread in to hole. are they the bolts with the tapered end similar to those that hold inner fenders? a picture would really help

[Mator]

Originally Posted by 1968aj

still trying to find out what kind of bolt holds the stock taillights on stepside bed. went to hardware store and nothing there will thread in to hole. are they the bolts with the tapered end similar to those that hold inner fenders? a picture would really help

Try 5/16-18. That's what I have used to mock my bed up.

[1968aj]

Originally Posted by Mator

Try 5/16-18. That's what I have used to mock my bed up.

went to hardware store for the third time. bought 5/16-18. will not fit factory threaded holes for taillights or backup lights. these are not any bolts that ace hardware has. anymore ideas? should be some common type of bolt .

[In The Ten Ring]

If I can remember to, I'll get some pics of my stepside also.

*The LMC taillights and reverse lights I ordered were perfect in every respect. I wish I could say that about the rest of the things I bought from them.

[1968aj]

finally got my taillights on. the threads were screwed up in the mounting holes. made some bolts work. thanks for all the help. sometimes the smallest thing can get your blood pressure up. THANKS FOR YOUR TIME.

[Clatterville trolley]

Originally Posted by 1968aj

finally got my taillights on. the threads were screwed up in the mounting holes. made some bolts work. thanks for all the help. sometimes the smallest thing can get your blood pressure up. THANKS FOR YOUR TIME.

Terrific! Determination and perseverance are your best tools sometimes. Jay