|
05-27-2015, 10:08 AM | #1 |
Registered User
Join Date: Jun 2014
Location: Bllomfield Iowa
Posts: 49
|
Rear end vibration
My 72 half ton has had a vibration since I bought it.I finally tracked it down its in the rear end.Any advice would be helpful. Thank you.
|
05-27-2015, 10:48 AM | #2 |
Registered User
Join Date: May 2013
Location: WEST PALM FLORIDA
Posts: 1,174
|
Re: Rear end vibration
Tires , shocks , bushings , axle bearings ,,, are what I would check first
__________________
68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive |
05-27-2015, 10:58 AM | #3 |
Account Suspended
Join Date: Jan 2007
Location: Tucson
Posts: 2,183
|
Re: Rear end vibration
Then check the U-joint on the pinion flange. It is more likely driveshaft or bearing related than something inside the diff housing. Problems there are usually accompanied by very loud and unplesant grinding noises that don't last long. Then the truck doesn't move under it's own power.
|
05-27-2015, 11:50 AM | #4 |
Registered User
Join Date: Oct 2014
Location: Mesa AZ (Near Phoenix)
Posts: 2,303
|
Re: Rear end vibration
You could try measuring how high off the ground it sits. Then jack it up and remove the tires. Put the lugs back on the drums to hold em in place as well as balance. Then lower the rear end onto jack stands about the same height and chock the front wheels. Put it in gear and up to speed. See if it's still vibrating. If not it's in the wheels and or tires. If so, it's deeper. Might want to go to a rear end shop for an estimate.
__________________
"Life is too short to drive a boring vehicle". Later, Wayne |
Bookmarks |
|
|