The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-28-2015, 03:19 PM   #1
GTS61
Registered User
 
Join Date: Mar 2015
Location: Jacksonville, Florida
Posts: 66
New power steering installed-no power steering?

i installed power steering on my 61 GMC 305 V6. I feel like I don't have any power steering. Could there be something I missed? I have a new gearbox, pump,hoses and belt but it's just like not having any power steering. Please help out this green horn!
Posted via Mobile Device
GTS61 is offline   Reply With Quote
Old 05-28-2015, 03:21 PM   #2
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: New power steering installed-no power steering?

May be air trapped in the system. Did you bleed the system?

Jack up the front end to get both tires of the ground and turn the wheels extreme left and right a few times. It will normally get most of the air out. Often times you will have to let it sit half an hour/hour and do it again. Make sure to check the fluid level as it may drop. Just my guess that there is air trapped in the lines since its all new components.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 05-28-2015, 03:34 PM   #3
GTS61
Registered User
 
Join Date: Mar 2015
Location: Jacksonville, Florida
Posts: 66
Quote:
Originally Posted by 1963c-10 View Post
May be air trapped in the system. Did you bleed the system?

Jack up the front end to get both tires of the ground and turn the wheels extreme left and right a few times. It will normally get most of the air out. Often times you will have to let it sit half an hour/hour and do it again. Make sure to check the fluid level as it may drop. Just my guess that there is air trapped in the lines since its all new components.
should I have the pickup running or off?
Posted via Mobile Device
GTS61 is offline   Reply With Quote
Old 05-28-2015, 03:30 PM   #4
62step
Registered User
 
Join Date: Jan 2014
Location: Rock Hill SC
Posts: 156
Re: New power steering installed-no power steering?

I agree ^
62step is offline   Reply With Quote
Old 05-28-2015, 03:36 PM   #5
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: New power steering installed-no power steering?

Can do either way, but will work best if the engine is off. Will probably take at least 10 full cycles left & right to work it out, maybe a few more. If the fluid is "foamy" with a lot of air, you will have to wait and let the fluid settle down and do it again.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Old 05-28-2015, 04:58 PM   #6
Ronw435
Registered User
 
Ronw435's Avatar
 
Join Date: Apr 2014
Location: Fate, Texas ( About 35 miles east of Dallas)
Posts: 318
Re: New power steering installed-no power steering?

It took mine a while to get all the air bled out. I would take it for a short drive around the SD and then when I get home checked the reservoir and it would have a lot of air. Let it set filled to cold line and repeat. It took several times to get all the air out, put in about 40 oz's total but stays full and steers like a new one......
Ronw435 is offline   Reply With Quote
Old 05-28-2015, 05:26 PM   #7
GTS61
Registered User
 
Join Date: Mar 2015
Location: Jacksonville, Florida
Posts: 66
Quote:
Originally Posted by Ronw435 View Post
It took mine a while to get all the air bled out. I would take it for a short drive around the SD and then when I get home checked the reservoir and it would have a lot of air. Let it set filled to cold line and repeat. It took several times to get all the air out, put in about 40 oz's total but stays full and steers like a new one......
Thanks a lot. It's really frustrating when everything is installed and it doesn't work.
Posted via Mobile Device
GTS61 is offline   Reply With Quote
Old 05-29-2015, 08:21 AM   #8
1963c-10
Registered User
 
1963c-10's Avatar
 
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
Re: New power steering installed-no power steering?

Glad you were able to resolve it!!!!!

Hows it driving?
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual
http://67-72chevytrucks.com/vboard/s...d.php?t=519869
1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide
http://67-72chevytrucks.com/vboard/s...d.php?t=619024
1964 Short bed trailer
1963c-10 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:47 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com