![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Feb 2014
Location: Tucson,Az
Posts: 128
|
Double wall to body seals
Any input as to how these are installed? My paint and body guy is having a difficult time. Got these from brothers so not sure if they are the correct ones.
|
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Jan 2014
Location: South Texas
Posts: 567
|
Re: Double wall to body seals
Tagging along on this one. I will be replacing these soon on my double wall top too.
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Feb 2014
Location: Tucson,Az
Posts: 128
|
Re: Double wall to body seals
Full pic
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Feb 2014
Location: Tucson,Az
Posts: 128
|
Re: Double wall to body seals
Bump
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Apr 2014
Location: Pensacola Florida
Posts: 18
|
Re: Double wall to body seals
PM sent
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Apr 2014
Location: Pensacola Florida
Posts: 18
|
Re: Double wall to body seals
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Feb 2014
Location: Tucson,Az
Posts: 128
|
Re: Double wall to body seals
Thanks for the input. Brother's had the part mislabeled. Just fyi. The part # for the top to window seal shows up in their system as a top to body seal which is totally different.
|
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2000
Location: Petrolia,Ontario,Canada but working in Port Huron,Mi.
Posts: 1,772
|
Re: Double wall to body seals
I know you said you have a double wall top but this may help.
Pic's of the weather stripping on my single wall. Bed rail seal. ![]() No fasteners are used. Just install with some weather strip caulk. ![]() This stuff. ![]() I've never had the opportunity to take a close look at a double wall top before. But the single wall has this channel around the window to hold the stripping. The weatherstripping in your pic look familier to the set I installed. The channel it sits in. ![]() Put back edge in first and use a screwdriver to set the front edge into the channel. ![]() ![]() Here is a close-up of how I fastened the bottom of the window seal. This is looking up from the bottom of the tops bed rail. ![]() ![]() Hope that helps. If not...just disregard.
__________________
71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE Last edited by BobbyK; 06-08-2015 at 11:35 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|