i need your help - please - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Alf67 · 06-11-2015, 10:16 AM

hi there
its a long time ago that i was here. i`m for austria - europe. i finishing my 65 stepside, but I made a big mistake - i did`t make any pics from the bed, and now I do not know how to install the bed correct. the problem for me are the cross seals (i hope this is correct - sorry for my bad english) maybe someone have some pice ect
thanks alot and peace from austria
alf

**PGSigns** · 06-11-2015, 10:35 AM

This should help. Everything about how to put the bed together.
http://www.mar-k.com/installation_hints.aspx
Jimmy

Alf67 · 06-11-2015, 10:48 AM

thanks Jimmy
but maybe someone have some pices
alf

Crazy Rusty · 06-11-2015, 10:56 AM

Quote:

Originally Posted by Alf67

thanks Jimmy
but maybe someone have some pices
alf

Take a look at my build thread, just did the bed in my 62 and it should be similar I would guess. Obviously somewhat different due to stepside vs fleet. Though I ended up measuring from the cab back towards the rear of the frame just to make sure I put them on right and knew where to drill my holes for the frame bolts.

Alf67 · 06-11-2015, 11:10 AM

thanks - i think the stepside is diferent
however - now I will have a icecold beer - and mybe tomorrow i will get an idea.
alf

Crazy Rusty · 06-11-2015, 11:43 AM

Just found this pic, 65 stepside without the wood in.
http://s645.photobucket.com/user/lak..._6786.jpg.html

06-11-2015, 10:16 AM	#1
Alf67 Registered User Join Date: Aug 2012 Location: Bruck - Austria Posts: 15	i need your help - please hi there its a long time ago that i was here. i`m for austria - europe. i finishing my 65 stepside, but I made a big mistake - i did`t make any pics from the bed, and now I do not know how to install the bed correct. the problem for me are the cross seals (i hope this is correct - sorry for my bad english) maybe someone have some pice ect thanks alot and peace from austria alf

06-11-2015, 10:35 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: i need your help - please This should help. Everything about how to put the bed together. http://www.mar-k.com/installation_hints.aspx Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

06-11-2015, 10:48 AM	#3
Alf67 Registered User Join Date: Aug 2012 Location: Bruck - Austria Posts: 15	Re: i need your help - please thanks Jimmy but maybe someone have some pices alf

06-11-2015, 11:10 AM	#5
Alf67 Registered User Join Date: Aug 2012 Location: Bruck - Austria Posts: 15	Re: i need your help - please thanks - i think the stepside is diferent however - now I will have a icecold beer - and mybe tomorrow i will get an idea. alf

06-11-2015, 11:43 AM	#6
Crazy Rusty Registered User Join Date: Jul 2011 Location: Tacoma, WA Posts: 176	Re: i need your help - please Just found this pic, 65 stepside without the wood in. http://s645.photobucket.com/user/lak..._6786.jpg.html __________________ 1965 C10 Longbed Stepside 1969 Chevelle Malibu 1962 C20 Fleetside - Build Thread (Sold before I could finish)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.