|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-07-2003, 01:35 PM
|
#1 |
|
72 Cheyenne
Join Date: Oct 2001
Location: San Diego
Posts: 2,086
|
Back window trim install, any tips?
I tried putting the stainless steel trim on my back window and it seems the easiest way would be to take the window out, the straight section is probably easy but the curved areas gave me a lot of trouble. I thought about grinding the lip off and just sliding it in with a little sealer to keep it from coming out.
Any tips? Thanks. |
|
|
|
09-07-2003, 01:43 PM
|
#2 |
|
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
the rear window has to be out to install the trim, and you do have the delux gasket?? with the window out you put the gasket on the window the trim in the trim slot and install the window
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
|
|
|
|
09-07-2003, 01:52 PM
|
#3 |
|
72 Cheyenne
Join Date: Oct 2001
Location: San Diego
Posts: 2,086
|
I have the correct gasket, the truck had it when I bought it but the body shop had to take the window out to do the paint and ruined the trim.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
