Duct Liner (Sound Deadener) Removal?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Sean C · 07-21-2015, 11:43 PM

Anyone have a brilliant idea for how I can remove this stuff easily? Used it as a sound deadener, which actually worked pretty well, however I'm getting ready to spray lizard skin, but this stuff is a pain to get off! Any of you clever people know some tricks in this area? My thumbs are killing me so anything helps ha.

Thanks guys!

BigDan3131 · 07-22-2015, 03:05 AM

A Heat Gun would be the best bet and Harbor Freight has the cheapest one.

Sean C · 07-22-2015, 08:22 AM

Quote:

Originally Posted by BigDan3131

A Heat Gun would be the best bet and Harbor Freight has the cheapest one.

I assume I'd have to heat the underside of the truck with the gun and hopefully it'll come off easier. Thanks!
Posted via Mobile Device

ibrown50 · 07-22-2015, 09:33 AM

I used a big hairdryer (don't tell the wife!) to remove the sound proofing from my truck, I heated it from above, doing a small area at a time and peeling it back as I went, it was slow but came up ok

cooperhw · 07-22-2015, 10:03 AM

Gas and a match. Stand way back when you fire the match at it.

Seriously though, you might be able to strip it off with one of the 36grit wheels that go on the die grinder.

Sean C · 07-22-2015, 03:11 PM

Quote:

Originally Posted by cooperhw

Gas and a match. Stand way back when you fire the match at it.

Seriously though, you might be able to strip it off with one of the 36grit wheels that go on the die grinder.

I considered a grinder of sorts. I think I'll try out the heat gun/putty knife and if that's not working, it might be time for the grinder.

Thanks for all the input guys! I'll post how it goes and I'll be updating my build thread as I finish out the cab

Mathew21 · 07-22-2015, 10:16 AM

I would agree with a heat gun. Work in small areas at a time. Heat from the top then scrape with a putty knife.

07-21-2015, 11:43 PM	#1
Sean C Registered User Join Date: Dec 2013 Location: NE Posts: 92	Duct Liner (Sound Deadener) Removal?? Anyone have a brilliant idea for how I can remove this stuff easily? Used it as a sound deadener, which actually worked pretty well, however I'm getting ready to spray lizard skin, but this stuff is a pain to get off! Any of you clever people know some tricks in this area? My thumbs are killing me so anything helps ha. Thanks guys! Attached Images

07-22-2015, 03:05 AM	#2
BigDan3131 Registered User Join Date: Jun 2006 Location: Maple Valley, WA Posts: 1,913	Re: Duct Liner (Sound Deadener) Removal?? A Heat Gun would be the best bet and Harbor Freight has the cheapest one. __________________ Custom Painter/Restoration Specialist 1965 GMC 3/4 Ton LB SOLD? 1964 Chevy El Camino in full restoration 1991 Chevy S10 288K+ miles 2nd Owner SOLD 2020 RAM 1500 Warlock

07-22-2015, 09:33 AM	#4
ibrown50 Registered User Join Date: Nov 2013 Location: Stanley Co' Durham UK Posts: 535	Re: Duct Liner (Sound Deadener) Removal?? I used a big hairdryer (don't tell the wife!) to remove the sound proofing from my truck, I heated it from above, doing a small area at a time and peeling it back as I went, it was slow but came up ok __________________ Getting old sucks.............but it sure beats the alternative

07-22-2015, 10:03 AM	#5
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,302	Re: Duct Liner (Sound Deadener) Removal?? Gas and a match. Stand way back when you fire the match at it. Seriously though, you might be able to strip it off with one of the 36grit wheels that go on the die grinder. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

07-22-2015, 10:16 AM	#7
Mathew21 Registered User Join Date: May 2010 Location: Clinton township, MI Posts: 1,192	Re: Duct Liner (Sound Deadener) Removal?? I would agree with a heat gun. Work in small areas at a time. Heat from the top then scrape with a putty knife. __________________ It only has original paint once



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.