AZ Parting out GMC Jimmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 07-24-2015, 11:48 AM

I picked up this 1977 GMC Jimmy for the Hickey roof rack and storage shelf. It had already been somewhat parted out but does still have a few good pieces. The doors are gone and the front clip is gone. Has a turbo 350 transmission, I am not sure what transfer case it has. Want $500 for the complete chassis with tranny and transfer case. The body is rough but may have some useable patch panels.
Hickey Roof rack $300
Tight Auto tilt column no key $125
Blazer receiver hitch $75
Shipping not included. If there are any other parts needed, please contact me for a price

Will add prices on the other parts as soon as I get it home today.

alf4444 · 07-24-2015, 04:49 PM

how much for the rear
bumper and all the brackets shipped to 84129?

**1774btcrew** · 07-24-2015, 05:22 PM

The bumper isn't good enough to justify shippimg

*gmachinz* · 07-24-2015, 07:42 PM

I got dibs on the gauge bezel if its got a good woodgrain one! And I'd like the column if its a cruise/tilt one too! You can PM me too if ya want....

**1774btcrew** · 07-25-2015, 05:35 PM

The dash bezel was cut up and broken. Sorry.

*gmachinz* · 07-26-2015, 12:40 AM

Hey....were you still going to send some GMC grill pics my way? I just need to know if you were and/or if you might want to work something out harness/wise-I have a guy with a really nice 77 GMC grill that's on standby....I talked with you about it first so I thought I'd work with you on it-but, if not no biggie just let me know so I can let him know that I'll take his grill. Thanks!

*gmachinz* · 07-27-2015, 12:29 AM

Quote:

Originally Posted by 1774btcrew

The dash bezel was cut up and broken. Sorry.

No worries about the woodgrain bezel-I found a nice one in a salvage yard that will restore very nicely! I looked at about 300-400 trucks at least and only found 1 woodgrain bezel out of a K5. Last time I went I grabbed one from a 74 Super Cheyenne Longhorn edition truck. I didn't see the Blazer one before because it was sitting on its side under a tree! Lol I literally climbed in through the collapsed hardtop to retrieve it!

**1774btcrew** · 07-27-2015, 12:41 AM

Nice! I had a mint 77 Non A/C one. I sure wish it was for an air truck!

1985-GMC · 12-07-2015, 12:46 AM

Quote:

Originally Posted by 1774btcrew

Nice! I had a mint 77 Non A/C one. I sure wish it was for an air truck!

Did you sell that one? This guy was looking for one, don't know if he ever got one.

http://67-72chevytrucks.com/vboard/s...d.php?t=544753

**1774btcrew** · 12-08-2015, 12:03 AM

Quote:

Originally Posted by 1985-GMC

Did you sell that one? This guy was looking for one, don't know if he ever got one.

http://67-72chevytrucks.com/vboard/s...d.php?t=544753

I didn't sell it but haven't decided what to do with it. It is so nice I hate to let it go.

mrblalock66 · 07-27-2015, 07:05 PM

How much for the interior rear panels?

mrblalock66 · 07-27-2015, 07:06 PM

Im also interested in the roof rack if it is in good shape. Hardware and all

**1774btcrew** · 08-04-2015, 04:07 PM

Quote:

Originally Posted by mrblalock66

Im also interested in the roof rack if it is in good shape. Hardware and all

Guess you don't need a roof rack?

**1774btcrew** · 07-27-2015, 08:18 PM

I responded to your PM. Roof rack is in good shape. The only reason it is for sale is that I have 2. I have accumulated quite a bit of Hickey stuff

**1774btcrew** · 10-30-2015, 12:06 PM

ttt Most of the parts are still available. Roof rack is off and ready to give shipping quotes on.

Littletony · 10-30-2015, 04:34 PM

Does this have the manual rear window? If so what shape is the handle in and the rubber seals on top of the tailgate?

**1774btcrew** · 10-30-2015, 04:40 PM

The whole rear gate is gone from this. Sorry I couldn't help

Littletony · 10-30-2015, 04:48 PM

That's ok I figured I would look on here before I feed LMC more money.

**1774btcrew** · 10-30-2015, 05:54 PM

I would ask around before sending LMC money. There should be some good quality used or maybe someone can suggest a good quality aftermarket one. For the most part, I have been very dissatisfied about the quality of LMC items. If you need an exterior handle, I may have a NOS one in my parts stock.

Yaman · 11-10-2015, 11:34 AM

Quote:

Originally Posted by 1774btcrew

I would ask around before sending LMC money. There should be some good quality used or maybe someone can suggest a good quality aftermarket one. For the most part, I have been very dissatisfied about the quality of LMC items. If you need an exterior handle, I may have a NOS one in my parts stock.

Interested in the NOS rear gate handle crank assembly.

Littletony · 10-30-2015, 05:57 PM

I'm sure a NOS one would triple the value of the jimmy it's going on. So I will continue looking for a good used one or a cheap Chinese one from LMC.

**1774btcrew** · 11-10-2015, 12:38 AM

ttt

lane224 · 11-10-2015, 09:25 AM

Would be interested in a price on square metal flap bolted to tub behind drivers rear wheel if in decent shape.

.

**1774btcrew** · 11-13-2015, 08:47 PM

Quote:

Originally Posted by lane224

Would be interested in a price on square metal flap bolted to tub behind drivers rear wheel if in decent shape.

.

I did check out that piece and it is nice. I could do $20 shipped to you. Let me know.

lane224 · 11-14-2015, 10:04 AM

I'll take it. PM your payment info.
Thanks

07-24-2015, 11:48 AM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Parting out GMC Jimmy I picked up this 1977 GMC Jimmy for the Hickey roof rack and storage shelf. It had already been somewhat parted out but does still have a few good pieces. The doors are gone and the front clip is gone. Has a turbo 350 transmission, I am not sure what transfer case it has. Want $500 for the complete chassis with tranny and transfer case. The body is rough but may have some useable patch panels. Hickey Roof rack $300 Tight Auto tilt column no key $125 Blazer receiver hitch $75 Shipping not included. If there are any other parts needed, please contact me for a price Will add prices on the other parts as soon as I get it home today. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck. Last edited by 1774btcrew; 11-10-2015 at 12:38 AM.

07-24-2015, 04:49 PM	#2
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Re: Parting out GMC Jimmy how much for the rear bumper and all the brackets shipped to 84129? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

07-24-2015, 05:22 PM	#3
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy The bumper isn't good enough to justify shippimg __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

07-24-2015, 07:42 PM	#4
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: Parting out GMC Jimmy I got dibs on the gauge bezel if its got a good woodgrain one! And I'd like the column if its a cruise/tilt one too! You can PM me too if ya want....

07-25-2015, 05:35 PM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy The dash bezel was cut up and broken. Sorry. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

07-26-2015, 12:40 AM	#6
gmachinz Account Suspended Join Date: Jun 2011 Location: Des Moines, IA. Posts: 4,143	Re: Parting out GMC Jimmy Hey....were you still going to send some GMC grill pics my way? I just need to know if you were and/or if you might want to work something out harness/wise-I have a guy with a really nice 77 GMC grill that's on standby....I talked with you about it first so I thought I'd work with you on it-but, if not no biggie just let me know so I can let him know that I'll take his grill. Thanks!

07-27-2015, 12:41 AM	#8
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy Nice! I had a mint 77 Non A/C one. I sure wish it was for an air truck! __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

07-27-2015, 07:05 PM	#11
mrblalock66 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 297	Re: Parting out GMC Jimmy How much for the interior rear panels?

07-27-2015, 07:06 PM	#12
mrblalock66 Registered User Join Date: Jul 2011 Location: Houston, Texas Posts: 297	Re: Parting out GMC Jimmy Im also interested in the roof rack if it is in good shape. Hardware and all

07-27-2015, 08:18 PM	#14
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy I responded to your PM. Roof rack is in good shape. The only reason it is for sale is that I have 2. I have accumulated quite a bit of Hickey stuff __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-30-2015, 12:06 PM	#15
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy ttt Most of the parts are still available. Roof rack is off and ready to give shipping quotes on. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-30-2015, 04:34 PM	#16
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting out GMC Jimmy Does this have the manual rear window? If so what shape is the handle in and the rubber seals on top of the tailgate? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

10-30-2015, 04:40 PM	#17
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy The whole rear gate is gone from this. Sorry I couldn't help __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

10-30-2015, 04:48 PM	#18
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting out GMC Jimmy That's ok I figured I would look on here before I feed LMC more money. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

10-30-2015, 05:54 PM	#19
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy I would ask around before sending LMC money. There should be some good quality used or maybe someone can suggest a good quality aftermarket one. For the most part, I have been very dissatisfied about the quality of LMC items. If you need an exterior handle, I may have a NOS one in my parts stock. __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.



Register or Log In To remove these advertisements.

10-30-2015, 05:57 PM	#21
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Parting out GMC Jimmy I'm sure a NOS one would triple the value of the jimmy it's going on. So I will continue looking for a good used one or a cheap Chinese one from LMC. __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

11-10-2015, 12:38 AM	#22
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: Parting out GMC Jimmy ttt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

11-10-2015, 09:25 AM	#23
lane224 Registered User Join Date: Aug 2014 Location: New York Posts: 597	Re: Parting out GMC Jimmy Would be interested in a price on square metal flap bolted to tub behind drivers rear wheel if in decent shape. . Attached Images

11-14-2015, 10:04 AM	#25
lane224 Registered User Join Date: Aug 2014 Location: New York Posts: 597	Re: Parting out GMC Jimmy I'll take it. PM your payment info. Thanks

Register or Log In To remove these advertisements.