AC kit for LS swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevybuilder6.0 · 08-26-2015, 12:50 AM

Do any of you know of an Airconditioning kit for the 67-72 trucks with an LS swap, most kit's I've seen are for small block chevy, and I have seen the the bracket to mount an AC compressor but I haven't found any kits that are all in 1 for an LS swap. I have the truck accessory drive. Also has anyone used the LMC AC kit that has the provision for shaved firewall?

67 chevelle · 08-26-2015, 09:00 AM

on the engine ,, quick , and holley makes brackets for sanden compressors ,, the rest of the components in most sbc kits fit the sanden compressors

*Taibo* · 08-26-2015, 11:22 AM

Quote:

Originally Posted by 67 chevelle

on the engine ,, quick , and holley makes brackets for sanden compressors ,, the rest of the components in most sbc kits fit the sanden compressors

Gm has available the entire accessory belt drive for the Cadillac CTS-V which includes A/C compressor, short water pump, alternator, power steering pump and all of the brackets and idlers to make it work. Look it up at GMPP, get the part numbers of just the pieces you need and order them. Or, buy the entire kit and e-bay the stuff you have left over. Simple, and it will fit your truck! Chevrolet Performance CTS-V Accessory Drive Systems with A/C direct from Summit racing $815.96 (without water pump) which you will need.

Andy4639 · 08-26-2015, 11:27 AM

I bought the LS1 bracket for the compressor on my 6.0 swap.

F.A.A.benny · 08-26-2015, 11:37 AM

Classic auto air and Vintage have that option. I have both of their catalogs and the parts are listed. Just give either a call and they should have no issues substituting the ls brackets for the sbc brackets

cooperhw · 08-26-2015, 01:56 PM

I bought the entire "accessory drive kit" from GM when I put my LS-2 crate motor in my Chevelle. The ac is way down into the frame, so I finally bit the bullet and ordered a kit from KWIK to relocated the compressor up high on the passenger side. Had to tweak it a little but overall a good kit. Comes with compressor, belt, all hardware.

Andy4639 · 08-26-2015, 06:12 PM

I have the Classic air AC kit for 134 a in mine.
Truck made their cover this month.

mighty_mike015 · 08-26-2015, 10:18 PM

http://www.alangrovecomponents.com/LS.htm

Longhornss · 08-26-2015, 10:32 PM

Holley and Kwik are your best options IMO. They both have options for spacing from Vette, f-body/gto and truck. (Just order correct spacers for your application) they mount the compressors up high and you don't need to worrie about weather or not you have the proper bolt holes in the block, as with some of the low mount stuff. You really want to make sure you are running a sanden compressor if you are using vintage air as their systems are designed to use them. Not the NEW factory GM type compressors. You can get away with running a "pancake" compressor.

08-26-2015, 12:50 AM	#1
chevybuilder6.0 Registered User Join Date: Aug 2015 Location: Victorville, CA Posts: 1	AC kit for LS swap Do any of you know of an Airconditioning kit for the 67-72 trucks with an LS swap, most kit's I've seen are for small block chevy, and I have seen the the bracket to mount an AC compressor but I haven't found any kits that are all in 1 for an LS swap. I have the truck accessory drive. Also has anyone used the LMC AC kit that has the provision for shaved firewall?

08-26-2015, 09:00 AM	#2
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: AC kit for LS swap on the engine ,, quick , and holley makes brackets for sanden compressors ,, the rest of the components in most sbc kits fit the sanden compressors __________________ 68 Long Fleet , ly6 , turbo 350 , 3-5 drop , original paint , front discs 67 Small window , 7 foot bed , tweaked 6.0 LSX 2004R Medium Olive 58 Apache fleet , 235 , offy intake , dual exhaust , 4 on the floor , red/white 69 Long Fleet , Custom , 6.0, 4l60 , AC , Medium Olive

08-26-2015, 11:27 AM	#4
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: AC kit for LS swap I bought the LS1 bracket for the compressor on my 6.0 swap. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-26-2015, 11:37 AM	#5
F.A.A.benny Registered User Join Date: Jul 2015 Location: Euless, Tx Posts: 431	Re: AC kit for LS swap Classic auto air and Vintage have that option. I have both of their catalogs and the parts are listed. Just give either a call and they should have no issues substituting the ls brackets for the sbc brackets

08-26-2015, 01:56 PM	#6
cooperhw Registered User Join Date: Oct 2014 Location: Mesa AZ (Near Phoenix) Posts: 2,303	Re: AC kit for LS swap I bought the entire "accessory drive kit" from GM when I put my LS-2 crate motor in my Chevelle. The ac is way down into the frame, so I finally bit the bullet and ordered a kit from KWIK to relocated the compressor up high on the passenger side. Had to tweak it a little but overall a good kit. Comes with compressor, belt, all hardware. __________________ "Life is too short to drive a boring vehicle". Later, Wayne

08-26-2015, 06:12 PM	#7
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,945	Re: AC kit for LS swap I have the Classic air AC kit for 134 a in mine. Truck made their cover this month. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

08-26-2015, 10:18 PM	#8
mighty_mike015 Registered User Join Date: Jan 2009 Location: Southern Indiana Posts: 63	Re: AC kit for LS swap http://www.alangrovecomponents.com/LS.htm

08-26-2015, 10:32 PM	#9
Longhornss Registered User Join Date: Mar 2015 Location: Windsor,Ontario Canada Posts: 255	Re: AC kit for LS swap Holley and Kwik are your best options IMO. They both have options for spacing from Vette, f-body/gto and truck. (Just order correct spacers for your application) they mount the compressors up high and you don't need to worrie about weather or not you have the proper bolt holes in the block, as with some of the low mount stuff. You really want to make sure you are running a sanden compressor if you are using vintage air as their systems are designed to use them. Not the NEW factory GM type compressors. You can get away with running a "pancake" compressor.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.