Stepside Filler and Tank (gas slops out the filler)

[76C10Stepside]

My '76 C10 stepside has one small gas tank on the right side of the frame, and filler hole is very low down on the fender. When I fill it, I have to kneel down, and I can't hold the filler spout upside down, because gas will shoot out if I do.
Also, if if fill the tank until the guage reads full (even though I'm pretty sure it's NOT full), gas slops out the filler hole when I turn left, until the level goes down aways. I NEVER fill it all the way up, only put $20 or sometimes $25 if it's really on "E".

This truck has dual exhaust and a heavy duty trailer hitch, so no room between the frame rails for a center-mounted gas tank.

Is there a cure for this problem, like moving the filler hole UP? Do the later stepsides have the filler hole higher on the fender?

[KrazyRay]

77-78 are 2" higher. 0r go with 79 up with the fuel door.

[76C10Stepside]

Originally Posted by KrazyRay

77-78 are 2" higher. 0r go with 79 up with the fuel door.

Thanks! I'm thinking of moving the filler up to the later position and keeping the external cap so it looks more original. Some punks stole my stainless steel gas cap a few years ago, and the one I got to replace it got rusty right away and is really hard to get on and off. I don't think the one LMC lists for $6.95 is stainless. Know where I can get another stainless gas cap?

[mMad Dawg]

I had trouble with gas spilling out of a 69 Chev I built . I put an new gas cap on it and never had the problem again .