The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 10-19-2015, 12:20 PM   #1
Aruba1
Registered User
 
Join Date: Apr 2014
Location: Birmingham, AL
Posts: 560
LS engine and radiator fans

Hello,

I have a 2001 5.3L engine in my truck and a 180 degree thermostat. The truck has two radiator fans and the wiring is setup for air conditioning although I have not installed the a/c yet. The car's radiator Fan 1 won't kick it until the temperature hit 200 degrees (give or take) and since I will be towing a lot, this is nerve wrecking. Is there any way that I can use a manual switch on Fan 2 to turn it on as I please? What is the best way to do this? Thanks
Aruba1 is offline   Reply With Quote
Old 10-19-2015, 01:57 PM   #2
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: LS engine and radiator fans

If you really just want a manual switch, then run the fan 2 lead to a switch in the cab. Otherwise, you can just have the temp limits changed in the tune and engage the primary fan earlier and/or engage the 2nd fan. Fan control 2 doesn't HAVE to be used for the A/C.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-19-2015, 04:23 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: LS engine and radiator fans

My ecm was originally setup for only one fan so I had to have num 2 fan added to it but they set my first fan to come on at 150 and 2nd fan comes on at 170 and i have a 160 thermostat....it will run all day at 160- 170..towing , hot weather, etc..
mongocanfly is offline   Reply With Quote
Old 10-20-2015, 12:04 AM   #4
Aruba1
Registered User
 
Join Date: Apr 2014
Location: Birmingham, AL
Posts: 560
Re: LS engine and radiator fans

Mongo, what part of alabama are you in? If you are around BHM, who did the tuning?
Aruba1 is offline   Reply With Quote
Old 10-20-2015, 08:20 AM   #5
homemade87
Registered User
 
Join Date: Apr 2010
Location: Guntersville Alabama
Posts: 1,073
Re: LS engine and radiator fans

Quote:
Originally Posted by Aruba1 View Post
Mongo, what part of alabama are you in? If you are around BHM, who did the tuning?
Aruba , We take ower stuff to a dyno and a tuner at hwy 11 and south Chalkville rd behind the BBQ place in Trussville . Pm me if you want more details .
homemade87 is offline   Reply With Quote
Old 10-20-2015, 12:52 AM   #6
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: LS engine and radiator fans

Keeping cooling is important, but keep in mind guys that you can actually keep a motor too cool. LS motors are designed to be run hot, hotter than normal for traditional small blocks. While not doing any damage, you aren't gaining anything in terms of performance or engine safety by doing so.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 10-20-2015, 01:13 AM   #7
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,402
Re: LS engine and radiator fans

Quote:
Originally Posted by BR3W CITY View Post
Keeping cooling is important, but keep in mind guys that you can actually keep a motor too cool. LS motors are designed to be run hot, hotter than normal for traditional small blocks. While not doing any damage, you aren't gaining anything in terms of performance or engine safety by doing so.
Agree....I run 2 -14" fans, with Painless controls . The stat is a 195, the controls wax on @ 205, wax off @ 195. Both fans kick together, & the mill don't ever see over 205 on temps? You don't want to run too cool, on temps....he!!, my 02 Silverado , runs 195-205 on temps longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 10-20-2015, 09:40 AM   #8
Aruba1
Registered User
 
Join Date: Apr 2014
Location: Birmingham, AL
Posts: 560
Re: LS engine and radiator fans

Yeah, thanks all. I would like to see it run between 180-195 and my danger zone being 200 and above. I know some people have reported their LS based engine to run over 220 and being fine but I am somewhat old school, gauge goes over 200 and I am pulling over, lol. Homemade, PM in the works!
Aruba1 is offline   Reply With Quote
Old 10-20-2015, 11:25 AM   #9
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,858
Re: LS engine and radiator fans

Quote:
Originally Posted by Aruba1 View Post
Yeah, thanks all. I would like to see it run between 180-195 and my danger zone being 200 and above. I know some people have reported their LS based engine to run over 220 and being fine but I am somewhat old school, gauge goes over 200 and I am pulling over, lol. Homemade, PM in the works!
The fans in my 2014 Camaro SS (LS3) do not even come on until around 212. The LS engines are designed to run hotter. Making them run to cool will hurt your fuel mileage and it's not good on the engine. Just my $.02.
Hart_Rod is offline   Reply With Quote
Old 10-20-2015, 11:40 AM   #10
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,671
Re: LS engine and radiator fans

Aruba1..I am north of cullman, about 60 miles north of you up i65..the guy I got the engine from unlocked the ecm ,and why i dont know but he put a 4.8 tune in it,but the final tune was done by a guy near huntsville and he put the correct tune in it for a 6.0.there are several guys around here local that do ecm tunes now.
As far as how cool mine runs I pulled what I assume is the factory thermo 1. To fill the block with antifreeze 2.to see what temp it was before I ever cranked it and it had a 160 in it..I don't know if it makes a difference but my 6.0 engine came from a escalade with 107000 miles on it so i dont think its been changed,so I left it as it was..i did put a new one in it while i had it out but stayed with the 160..at the parts store they showed a 160 and a 180 for my engine..and its a might warmer here in Alabama summertime than up north so I didn't think it would hurt for it to run cooler.
mongocanfly is offline   Reply With Quote
Old 10-20-2015, 05:16 PM   #11
Andy4639
Old member
 
Andy4639's Avatar
 
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
Thumbs up Re: LS engine and radiator fans

I just got home from looking at new 2015 Silverado's. I've been thinking about trading my 08 Tahoe in on one. My 08 Tahoe is factory stock LTZ nothing has been touched on it with a 5.3 and it runs 210 all day everyday weather I'm towing are just cruising!
Running these motor's at 165 are anything less than 190 is hurting you on MPG!
These motor need to run with in the parameters they where designed for which is 210. As long as you keep the trans temp below 200 you are good to go.
I wouldn't want mine running any less than 190.
Just some info on the new 5.3 that I looked at. They all had electric steering and the water outlets are on the drivers side now so a swap will be much easier as far as hoses. The intakes are car types now also!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71


Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour


http://upstategmtrucks.com/



Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!

LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
Andy4639 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com