TX Parting - 1972 4WD Blazer

[Frugalmeyer]

Pulling the suspension in "Mid June". I will pull the drivetrain earlier if a can have most of it sold.
I am posting this thread in advance because once I pull the Blazer in the garage to begin the conversion I do not have much room to store the parts I pull and need them gone. I am going to be replacing the 4WD suspension and drivetrain with 2WD, 5 Lug, LS powered and vintage air.
I will be selling all the 4WD suspension, drivetrain, wheels and tires and A/C system.

[Frugalmeyer]

I will be keeping the A/C control and dash vents.

[1972 Jimmy]

Interest in the evaporator mounted in front of the radiator. What shape is it in??? Any broken fins??

[Brave71]

I need vac canister, inside and outside vac actuators, all brackets for actuators, also flapper in cowl.there is a couple of rods that hook to actuators l need.how much to 89015..thanks

[1972 Jimmy]

Originally Posted by 1972 Jimmy

Interest in the evaporator mounted in front of the radiator. What shape is it in??? Any broken fins??

Can you post some pics and a price?

[Frugalmeyer]

350.00 for A/C system minus control and dash vents. Buyer pays for shipping.

[Arrington01]

What gear ratio are the axles?

[Frugalmeyer]

Looks like RAZ axle code but not sure. Photos attached.

[Arrington01]

How much

[bluek5]

Does it have a skid plate and cross member for the transfer case? Also how about the gear reducer for the speedometer cable. Would need them shipped to 84043.
Thanks, Paul

[Frugalmeyer]

Transfer cross member and skid plate.

[RedRoad]

Interested in the cowl vent flap assembly. Stick or auto? Looking for single bend shifter if stick.

Thanks

[tristan]

Possibly interested in all of the AC components mounted to the inside and outside of the firewall plus the compressor, brackets hoses, and other bric-a-brac that you aren't keeping. I don't need the condenser, controls, diverter box or dashboard stuff.

[DeadheadNM]

I'd be interested in the following pending condition pics and cost w shipping to 87107:
Radiator
Fan shroud
Fuel tank skid plate w attach bolts
Linkage from shift lever to tcase and or tcase shifter bolt
Hei distributor
Engine oil dip stick
Metal hose strap affixed to inner RH fender w screws

Thanks

[hold24]

I would be interested in a bed mat if its a clean one or even has it
thanks

[1972 Jimmy]

Is the 4x4 shifter Chrome if so what condition and price?

[Frugalmeyer]

No Bed mat.

[1970]

Interested in

front leaf spring hanger brackets
bump stop brackets
upper shock brackets
rear spring front brackets
radiator core brackets

[72chevynut]

Please put me in line for the AC vacuum ball tank and bracket. Shipping would be to 40353. Thanks

[leddzepp]

Please list prices per forum rules ASAP. Thank you!

[Frugalmeyer]

I am new to this board and will read the rules and try this again. Sorry for any inconvenience.

[walkintall54]

interested in drive shaft.

[extd56]

are you selling the hatch

[tristan]

I'm giving up first dibs on the AC equipment to any of you guys who may have an immediate need. If no one needs them then I may be baaaack....

[Frugalmeyer]

Radiator 85.00 plus shipping. No leaks.
Fan Shroud 55.00 plus shipping. One hole drilled in center top.

DeadheadNM has first dibs.