Anybody do an ls swap AND AAW classic update kit together? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sherm6413 · 03-24-2016, 11:05 AM

If somebody has I have a couple questions about a couple wires, thanks

beaterku · 03-24-2016, 01:12 PM

Quote:

Originally Posted by sherm6413

If somebody has I have a couple questions about a couple wires, thanks

I am not doing them together, but I am installing the AAW kit now and the LS later this year.

Oldblue68chevy · 03-24-2016, 01:59 PM

I just did a wire harness and an ls swap. it wasn't an aaw but it was a universal gm harness.

hozeman469 · 03-24-2016, 03:18 PM

Up to my elbows in a ls swap like that right now,along with vintage air and Dakota digital dash,yeah I know crazy.Have wires everywhere.so don't know how much help I would be.

Kennuck · 03-24-2016, 06:10 PM

I have done it.

sherm6413 · 03-24-2016, 10:04 PM

Here's my dilemma , I have intellitronix gauges goon in too, so that throws in a wrench. Where will my vss signal from Ecu hook on aaw harness?? Or go straight to gauges? Also there's a long unlabeled orange wire by heater wires ... Where does this go? Doesn't go to heater , and I've yet to get ahold of intellitronix or aaw customer service after 2 days of attempts all day...frustrating

clinebarger · 03-25-2016, 12:02 AM

Quote:

Originally Posted by sherm6413

Here's my dilemma , I have intellitronix gauges goon in too, so that throws in a wrench. Where will my vss signal from Ecu hook on aaw harness?? Or go straight to gauges? Also there's a long unlabeled orange wire by heater wires ... Where does this go? Doesn't go to heater , and I've yet to get ahold of intellitronix or aaw customer service after 2 days of attempts all day...frustrating

Classic Update? Highway? Restoration partial?

badherb · 03-24-2016, 10:18 PM

great source:

http://lt1swap.com/2000harness.htm

hozeman469 · 03-24-2016, 11:36 PM

Looking at the aaw wire diagram a single orange wire will go to the cigarette lighter maybe that's it.VVS is set up different on mine but I would think it would go to the cluster not the aaw harness.

Kennuck · 03-25-2016, 08:51 AM

VSS signal wire goes directly to the speedo gauge it doesn't hook into the AAW harness.

The long orange wire is probably for the glove box light. There are other orange wires in the harness under the dash but I think they are labelled.

The instructions are quite good and are downloadable from the AAW website if you don't have the sheet that shows this long orange wire. I used AAW tech support a couple times and always got a person to talk to right away and answered my questions promptly. Good Luck with your build.

sherm6413 · 03-31-2016, 11:30 AM

Thanks guys, I have the papers and diagrams. Kennuck- so I don't use the included purple and yellow vss wires at all you say? I go from swap harness vss signal straight to gauge?

**Hart_Rod** · 04-01-2016, 09:59 AM

Quote:

Originally Posted by sherm6413

Thanks guys, I have the papers and diagrams. Kennuck- so I don't use the included purple and yellow vss wires at all you say? I go from swap harness vss signal straight to gauge?

You don't use those 2 wires and can remove them from the harness. Use the vss wire from the EFI harness.

sherm6413 · 04-01-2016, 10:57 AM

What do I do about a ground for the vss then?? Good info guys, thanks again

**Hart_Rod** · 04-01-2016, 01:06 PM

Quote:

Originally Posted by sherm6413

What do I do about a ground for the vss then?? Good info guys, thanks again

I think you are talking about the gauge? Just use a chassis ground.

sherm6413 · 04-01-2016, 03:15 PM

Ahh, ok thanks guys I will see how this goes tomorrow!!

03-24-2016, 11:05 AM	#1
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Anybody do an ls swap AND AAW classic update kit together? If somebody has I have a couple questions about a couple wires, thanks

03-24-2016, 01:59 PM	#3
Oldblue68chevy Registered User Join Date: May 2014 Location: Freedom Pa Posts: 139	Re: Anybody do an ls swap AND AAW classic update kit together? I just did a wire harness and an ls swap. it wasn't an aaw but it was a universal gm harness.

03-24-2016, 03:18 PM	#4
hozeman469 Registered User Join Date: Mar 2012 Location: Monroe, Louisiana Posts: 40	Re: Anybody do an ls swap AND AAW classic update kit together? Up to my elbows in a ls swap like that right now,along with vintage air and Dakota digital dash,yeah I know crazy.Have wires everywhere.so don't know how much help I would be.

03-24-2016, 06:10 PM	#5
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Anybody do an ls swap AND AAW classic update kit together? I have done it. __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

03-24-2016, 10:04 PM	#6
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Anybody do an ls swap AND AAW classic update kit together? Here's my dilemma , I have intellitronix gauges goon in too, so that throws in a wrench. Where will my vss signal from Ecu hook on aaw harness?? Or go straight to gauges? Also there's a long unlabeled orange wire by heater wires ... Where does this go? Doesn't go to heater , and I've yet to get ahold of intellitronix or aaw customer service after 2 days of attempts all day...frustrating

03-24-2016, 10:18 PM	#8
badherb Registered User Join Date: Mar 2016 Location: Yakima Washington Posts: 122	Re: Anybody do an ls swap AND AAW classic update kit together? great source: http://lt1swap.com/2000harness.htm __________________ 1960 SWB “Pops” If you won't support our troops then stand in front of them!

03-24-2016, 11:36 PM	#9
hozeman469 Registered User Join Date: Mar 2012 Location: Monroe, Louisiana Posts: 40	Re: Anybody do an ls swap AND AAW classic update kit together? Looking at the aaw wire diagram a single orange wire will go to the cigarette lighter maybe that's it.VVS is set up different on mine but I would think it would go to the cluster not the aaw harness.

03-25-2016, 08:51 AM	#10
Kennuck Registered User Join Date: Oct 2013 Location: Dresden, Ontario Posts: 647	Re: Anybody do an ls swap AND AAW classic update kit together? VSS signal wire goes directly to the speedo gauge it doesn't hook into the AAW harness. The long orange wire is probably for the glove box light. There are other orange wires in the harness under the dash but I think they are labelled. The instructions are quite good and are downloadable from the AAW website if you don't have the sheet that shows this long orange wire. I used AAW tech support a couple times and always got a person to talk to right away and answered my questions promptly. Good Luck with your build. __________________ 1970 Short Wide 5.3 4L60E BlackBear tune 3:73 gears, Boyd's Tank 2.5 / 4 drop 5 lug disc brakes Vintage Air 18x8 Ridlers 255/55 frt. 18x9.5 275/60 rear

03-31-2016, 11:30 AM	#11
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Anybody do an ls swap AND AAW classic update kit together? Thanks guys, I have the papers and diagrams. Kennuck- so I don't use the included purple and yellow vss wires at all you say? I go from swap harness vss signal straight to gauge?

04-01-2016, 10:57 AM	#13
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Anybody do an ls swap AND AAW classic update kit together? What do I do about a ground for the vss then?? Good info guys, thanks again

04-01-2016, 03:15 PM	#15
sherm6413 Registered User Join Date: Mar 2015 Location: Hannibal mo Posts: 281	Re: Anybody do an ls swap AND AAW classic update kit together? Ahh, ok thanks guys I will see how this goes tomorrow!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.