|
|
|
03-25-2016, 01:05 PM
|
#1 |
|
Registered User
Join Date: Aug 2014
Location: Port Townsend, WA
Posts: 14
|
Master cylinder
Is there a dual m/c that I can directly use to replace the stock one in my '64 gmc? I am hoping for a direct bolt in without having to drill or cut extra holes. Thanks,
Fourdy |
|
|
|
03-25-2016, 01:51 PM
|
#2 |
|
Registered User
Join Date: Jan 2016
Location: Marlborough CT
Posts: 33
|
Re: Master cylinder
I just put one in my 1964 panel. I used one from a 1967 4X4 with drum brakes. Bolts right in. A1 Cardone part number 10-1329.
Hope this helps. John P.S. this is for manual brakes. |
|
|
|
|
03-26-2016, 12:16 PM
|
#3 |
|
Registered User
Join Date: Aug 2014
Location: Port Townsend, WA
Posts: 14
|
Re: Master cylinder
Thank you so much. Just ordered one.
|
|
|
|
|
03-27-2016, 12:08 AM
|
#4 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: Master cylinder
It doesn't have to be for a 4x4. One for a '67-'70 C series will work just fine.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
|
03-27-2016, 05:11 PM
|
#5 |
|
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: Master cylinder
you may have to adjust the push rod some, otherwise direct fit. Some guys say they don't have to adjust the rod, in my case my pedal goes all most 2-4 inches from the floor.
__________________
If you don't like this  pound sand .....
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
