options for gas pedal and throttle cable

[YOLO]

I put in a 350/350 in my 64 c10. A guy I work with says to use an early 90's suburban gas pedal and throttle cable. What do you think is a good option?

[LT1 Burb]

I used a 72 c10 one.

[Dismas]

This link: http://www.persh.org/pickup/CableThrottle.htm inspired me.

I used a pedal and cable assembly from around a 76 or so chevy, and it was only about a 2 hour project

[dodgiesdad]

Firewall mounted Lokar gas pedal and matching cable. I also added a matching brake pedal. I did weld in a flat spacer to mount it to, I used a chunk of a old bed rail to make it from.

[forestb]

What year is you truck? and did you need to do any modifications to get that break peddle to work? I could not find a break peddle for my 62 on the Lokar sight.

Originally Posted by dodgiesdad

Firewall mounted Lokar gas pedal and matching cable. I also added a matching brake pedal. I did weld in a flat spacer to mount it to, I used a chunk of a old bed rail to make it from.

[dodgiesdad]

First, I was concerned with an aluminum pedal so I went with the chrome plated steel version, I sure hope it lasts more than a few years. As to the brake pedal I cut off the factory curved pedal and welded a small piece of flat stock in its place to give me somewhere to bolt the new pedal to.

[urmyboyblue]

Anyone know where to get a complete new assembly for a 73-87 truck- or even a 67-72? I want to do this swap as well. I have a matching one to dodgiesdad's but mine has bent and looks ugly after several years of use.

[YOLO]

any other options out there?

[SCOTI]

Ttt.....