61 Chevy Apache step side long bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevy Apache · 04-03-2016, 02:20 PM

Here's are truck only had it for a year so as all these trucks are a work in progress looking for some info if possible do anyone out there know which lower ball joints will fit on stock spindles

as I am making some lower control arms for it as there is so little info on this year of truck thanks Pete will try to add some pics of it not sure how to

**aerotruk63** · 04-03-2016, 05:58 PM

Also may need some periods. Commas, and question marks? A capital letter might help as well. lol

CUT!

Take two!

Chevy Apache · 04-03-2016, 06:08 PM

Quote:

Originally Posted by aerotruk63

Also may need some periods. Commas, and question marks? A capital letter might help as well. lol

CUT!

Take two!

Sorry lol not very good at punctuation. Thanks for your reply, I will have a look does this cover a 1961 Apache

**aerotruk63** · 04-03-2016, 07:57 PM

OK, stock 61 spindles with drum brakes?
Are you looking at upgrading to disk brakes?

Chevy Apache · 04-03-2016, 08:12 PM

Quote:

Originally Posted by aerotruk63

OK, stock 61 spindles with drum brakes?
Are you looking at upgrading to disk brakes?

Did a brake upgrade from cpp brakes last year with new rotors and all the other brake parts, and drop spindles when we bought the truck it had know front suspension just the upper and lower a arms, I converted it to run on coil over shocks. Now I want to put it on air suspension, so need to find a ball joint that will fit, in the bottom of the spindles which are are on the ordinal a arms.thanks for your time Pete. any advise would be great

Chevy Apache · 04-07-2016, 07:46 AM

Any ideas

04-03-2016, 02:20 PM	#1
Chevy Apache Registered User Join Date: Apr 2016 Location: England Posts: 173	61 Chevy Apache step side long bed Here's are truck only had it for a year so as all these trucks are a work in progress looking for some info if possible do anyone out there know which lower ball joints will fit on stock spindles as I am making some lower control arms for it as there is so little info on this year of truck thanks Pete will try to add some pics of it not sure how to Last edited by Chevy Apache; 04-03-2016 at 02:41 PM.

04-03-2016, 05:58 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 61 Chevy Apache step side long bed Also may need some periods. Commas, and question marks? A capital letter might help as well. lol CUT! Take two! __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-03-2016, 07:57 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: 61 Chevy Apache step side long bed OK, stock 61 spindles with drum brakes? Are you looking at upgrading to disk brakes? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-07-2016, 07:46 AM	#6
Chevy Apache Registered User Join Date: Apr 2016 Location: England Posts: 173	Re: 61 Chevy Apache step side long bed Any ideas



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.