65 c10 fleetside bed mats ?

[WOLFMANmike]

hey guys do any of you know if they make a rubber pre cut bed mat for our trucks ? and if so where i go to get one please ?

[lamchop]

not sure but perhaps ol jc whitney might have a universal type that you could trim?

[sodly]

I think Jim Carter Truck Parts carries one.

[stsalvage]

some what of a bad idea you get Mildew that eats into the wood and makes it soft then you get wood Rot then cancer that's like leaving trash like leave dirt and any thing that holds water so if you have a good Bed wood put some water Thomson's wood oil seal or just pour old Oil on your bed and let it soak in it will stop the mildew and Wood Rot

[WOLFMANmike]

Originally Posted by stsalvage

some what of a bad idea you get Mildew that eats into the wood and makes it soft then you get wood Rot then cancer that's like leaving trash like leave dirt and any thing that holds water so if you have a good Bed wood put some water Thomson's wood oil seal or just pour old Oil on your bed and let it soak in it will stop the mildew and Wood Rot

I can't afford a new Wood bed kit ... and the wood is shot so I want the mat to cover up the crappy Wood and look nicer

[Clyde65]

I bought new rough cut bed wood for 100.00
Trimmed and drilled and stained with black outdoor paint from lowes.

[WOLFMANmike]

Originally Posted by Clyde65

I bought new rough cut bed wood for 100.00
Trimmed and drilled and stained with black outdoor paint from lowes.

only problem is i dont know the 1st thing about working with wood .. and also the metal strips that hold down the wood slats are not there stupid PO lol messed up everything so i would have to buy the strips again too . also i dont have and wood working tools . but your idea was a good one and cheaply done if i had the know how

[Clyde65]

bed strips, Steel. $81.00

http://www.mar-k.com/Catalog/catalog.aspx

You could also go to a cabinet shop and give them these and they can cut them for you.

Oh and bolt kit.

http://www.mar-k.com/Catalog/catalog.aspx

Instructions for wood!

http://www.gmcpauls.com/47-72_BedWood_Info.htm

I am a computer guy.....If I can do it, everyone can! you just need to want to my friend!

[akqj9]

I couldn't find a rubber bed mat fit for my 64 fleetside so I got one for a recent (in the 2000's) Chevy fleetside. It fits the fenderwells ok, but is short on the sides in front and behind the fenders.

[61K10]

look for one for a newer ford super duty. their beds are wider than a newer chevy. 60-66 fleets are about 3to4" wider. get a long bed and cut it.

[sodly]

As I mentioned, I'm pretty sure Jim Carter sells one that fits a long bed. At least he did a couple of years ago when I bought one.