|
04-10-2016, 11:20 AM | #1 |
Registered User
Join Date: May 2010
Location: nw SanAntonio, TX
Posts: 69
|
rear brake lines
My brakes are a mess. The 3/16" brake lines on the rear axle were so bad that when I tried to loosen them to replace the wheel cylinders, one "pretzel twisted". So, I will be replacing them, obviously.
But here is my question. I am betting that the original steel brake line to the rear was 1/4". Can someone confirm that? If I am right, then the rear flexible brake hose went from the 1/4" line to the "T" fitting reduction to 3/16" lines on the axle. Therefore, if I order an original rear brake hose, it would have the correct fittings to accomplish this, right? Someone replaced the original rear steel brake line on mine. I can tell because they are the sections of 3/16" steel line like you find at the parts store joined by fittings. Thanks in advance, Lou |
04-10-2016, 07:15 PM | #2 |
Chevy addict
Join Date: May 2012
Location: Iron Ridge, WI
Posts: 1,085
|
Re: rear brake lines
Rear lines are 3/16 on most trucks
|
04-10-2016, 07:16 PM | #3 | |
Senior Member
Join Date: Nov 2012
Location: Southeast Michigan
Posts: 792
|
Re: rear brake lines
Quote:
Last edited by VictoriaHardware; 04-10-2016 at 07:17 PM. Reason: clarify |
|
04-11-2016, 10:33 AM | #4 |
Registered User
Join Date: May 2010
Location: nw SanAntonio, TX
Posts: 69
|
Re: rear brake lines
Good info, thanks. I am installing a Corvette style m/c with a combination valve that has a 3/8-24 inverted flare for the rear line. Got some 1/4" brake line that I will run from there to the back brake hose. So, I need a fitting to go from 3/8-24 to 1/4" brake line then a 1/4" fitting to fit the rear hose. Trouble is, it is hard to find a "good auto parts store" anymore that carries all those neat fittings. Anybody got a good website source?
|
04-15-2016, 08:50 PM | #5 |
Senior Member
Join Date: Nov 2012
Location: Southeast Michigan
Posts: 792
|
Re: rear brake lines
I recently replaced the rear brake hose with the brass adapter fitting on my '66 C10. I even more recently replaced the hose and the two original steel lines on the axle when I upgraded to rear disc. It is all in like-new condition (from a 50K California truck) and I'd be willing to give it all to you for the cost of shipping. Interested or are you already set?
|
04-16-2016, 08:53 AM | #6 |
Registered User
Join Date: May 2010
Location: nw SanAntonio, TX
Posts: 69
|
Re: rear brake lines
Thank you for the offer. Just yesterday I got under the 'burb and made new 3/16" lines from the T and ordered a rear flex hose.
|
Bookmarks |
|
|