62 C10 neutral Safety Switch

[robber grin]

62 C10 stock wiring

75ish GM van column

what wire do I cut from the ignition switch to go to neutral safety switch?

64-66 is purple I believe but mines a 62 and there's no purple wire only pinkish

[lumpy63]

Try using a test light on the ignition switch to see which wire is energized in start position this will be your start wire . Make sure truck is in park! route this wire through safety switch and on to solenoid. D id you have any issues with neutral switch interfering with upper column mount? I had to relocate my switch further down so I could clock my column correctly

[robber grin]

Originally Posted by lumpy63

Try using a test light on the ignition switch to see which wire is energized in start position this will be your start wire . Make sure truck is in park! route this wire through safety switch and on to solenoid. D id you have any issues with neutral switch interfering with upper column mount? I had to relocate my switch further down so I could clock my column correctly

I got lost in the momentary blur of spaghetti wiring. I got it - and it was purple!

I relieved the side of my bracket to make room for it where it was on the tube but it's a bear to get at.

thanks