Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
05-08-2016, 08:43 PM | #1 |
Registered User
Join Date: Sep 2015
Location: Hamilton, Ontario, Canada
Posts: 26
|
4x4 rallies on a 66 c10
Hi everyone. Hoping to get some advice...
I have received "free" 80's 4x4 rallies for the truck.. as you can see by the pics they still need to be cleaned up a bit but will look much better than my current rims. Anyhow, I took 4 pics. One of the rims off the truck (front), one off the truck (back), one installed, and one close up of the rim to hub contact. My questions / comments are.... 1. Are these 4x4 rims ok for my truck? 2. The backs of the rims will not sit flush with the drum because it is "scalloped"? (second pic) is this ok? 3. When the rim is tightened the hub does not go beyond the rim so i cannot ensure good contact (pic 4).. is this ok? Thanks 66GWN |
05-08-2016, 10:02 PM | #2 |
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: 4x4 rallies on a 66 c10
__________________
If you don't like this pound sand ..... |
05-08-2016, 11:56 PM | #3 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 4x4 rallies on a 66 c10
Sometimes the center of the wheel is tight on the hub register. I would suggest using a file or flap wheel to clean up both the wheel center and the hub register and see if that helps the fitment issue. You might have to work at it a bit to get a nice fit.
The 4x4 rally's have been used on the early trucks for many years.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
05-09-2016, 06:23 AM | #4 |
Registered User
Join Date: May 2014
Location: Kewanee IL
Posts: 283
|
Re: 4x4 rallies on a 66 c10
|
05-09-2016, 09:00 AM | #5 |
Registered User
Join Date: Apr 2014
Location: Pennsylvania
Posts: 186
|
Re: 4x4 rallies on a 66 c10
they fit fine. Previous owner put them on. I just cleaned them up and bought 4 rear centers (no lockout hub hole)
__________________
--Life looks better through a curved windshield-- |
05-09-2016, 06:34 PM | #6 |
Registered User
Join Date: Sep 2015
Location: Hamilton, Ontario, Canada
Posts: 26
|
Re: 4x4 rallies on a 66 c10
Those look great.... where did you get them with the chevy emblem??
|
05-09-2016, 07:39 PM | #7 |
One foot in front of the other
Join Date: Aug 2008
Location: Parrottsville, TN
Posts: 5,443
|
Re: 4x4 rallies on a 66 c10
Later model cap
|
05-09-2016, 07:45 PM | #8 |
Registered User
Join Date: Dec 2013
Location: Oak Ridge, Mo.
Posts: 301
|
Re: 4x4 rallies on a 66 c10
I have the exact chevy emblem - found them on ebay.
__________________
If you don't like this pound sand ..... |
05-09-2016, 08:16 PM | #9 |
Registered User
Join Date: Jun 2012
Location: happy valley or.
Posts: 106
|
Re: 4x4 rallies on a 66 c10
Just my opinion but I think these are the best looking steel wheels you can put on these trucks. these were sandblasted, painted dbc two stage ppg clear. New rings and centercaps.
|
05-10-2016, 02:32 AM | #10 |
Registered User
Join Date: Oct 2014
Location: somewhere . . .
Posts: 974
|
Re: 4x4 rallies on a 66 c10
nice looking wheel(s) ...
__________________
dont want to hear excuses, i want to hear solution(s) |
05-10-2016, 12:13 PM | #11 |
Registered User
Join Date: Nov 2013
Location: Rapid City, South Dakota
Posts: 83
|
Re: 4x4 rallies on a 66 c10
They fit fine. Just need to opeln up the center holes alittle.
|
Bookmarks |
|
|