Fender Badge Removal/Install GMC JIMMY

[Sandtrap9072]

So, i am thinking of buying a new set of emblems. How easy/Hard is it to replace the fender emblems? Do i need to take the fender off or can i get to the nuts by just removing the wheel well? I have read a couple different posts saying it cant be done without taking the fender off, is this true?

[landy]

I've read that too. I tried accessing mine, but couldn't reach one of the fasteners.

[Tom Vogel]

I cant remember on mine, but I'm next to positive you can easily reach the nuts if you drop the fender well.

[Speedway16]

They are pretty easy to get to if you remove the inner fender.

[JJH Jimmy]

I thought that it kinda sucked going through the inner fender. The trick was to get the speed nut on the stud. I lined a box end wrench with masking tape So the nut would stick to it.

[pound41]

Most people when they replace them don't use the regular nuts. They use the barrel nuts the hollow insert that expands when the stud goes in it

[Sandtrap9072]

Ok, so its definitely do able. looks like i am going to order me some new emblems. thanks for you help guys!