|
|
|
10-02-2003, 11:04 AM
|
#1 |
|
Senior Member
 Join Date: Sep 2002
Location: Greenfield Mass.
Posts: 551
|
???? for longhorn man
 I have a 63 caddy and I was wondering if you knew of any sites where i can find out info on it. I know you did a swap into a truck. the only number i could find was on the drivers door frame. motor #63g067109 body S.D. which I think means sedan deville I know this is not truck related . but during the course of swaps we tend to pick up info. anybody else know of anythingthat might help please jump right in . I am looking for some interior parts mostly thanks  :
__________________
Certifiably crazy person Last edited by biglou55; 10-02-2003 at 11:07 AM. |
|
|
|
10-02-2003, 11:38 AM
|
#2 | |
|
Registered User
Join Date: Feb 2003
Location: The Rubber City
Posts: 5,498
|
Re: ???? for longhorn man
Quote:
Cast iron block Displacement: 390 cubic inches Bore and stroke: 4.00 x 3.875 inches Compression ratio: 10.5:1 Horsepower: 325 @ 4800 rpm Five main bearings Hydraulic valve lifters Carburetion: Rochester four-barrel model 710930. NOTE: Although neither engine displacement or output changed, the 1963 Cadillac V-8 was completely redesigned. Quieter, smoother and more efficient, the new motor was one-inch lower, four inches narrower and 1-1/4 inches shorter than the 1962 V-8. It was also some 82 pounds lighter, due to the use of aluminum accessory drives. http://www.100megsfree4.com/cadillac/cad1960/cad63d.htm
__________________
1969 GMC K2500  1996 Honda Accord 2007 Kawasaki KLR 650 |
|
|
|
|
|
10-03-2003, 09:55 AM
|
#3 |
|
Senior Member
Join Date: Sep 2002
Location: Greenfield Mass.
Posts: 551
|
THANK,S 69 gmc that is quite the informative site I will be going there often. now to find some parts .any help from any members would be appreciated, this car came from cal. ten yr,s ago thanks   
__________________
Certifiably crazy person Last edited by biglou55; 10-03-2003 at 09:57 AM. |
|
|
|
|
10-03-2003, 11:26 AM
|
#4 |
|
Registered User
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
|
What parts do you need?
__________________
Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com |
|
|
|
|
10-03-2003, 12:00 PM
|
#5 |
|
Senior Member
Join Date: Sep 2002
Location: Greenfield Mass.
Posts: 551
|
 busterwivell I need interior door panels and armrests back panels by seat under the windows back cardboard piece under back window. this car came from cal. ten yr,s ago up here in the rust belt these cars are long since rusted away. the mice had a field day in this one for 5 yr,s I can order new weather striping -body -and mechanical parts. but i have found no one who has interior parts. any help would be apreciated THANK,s I know this is our truck board but I could find no caddy boards like this out there. I would love to live out there where nothing rusts
__________________
Certifiably crazy person Last edited by biglou55; 10-03-2003 at 12:04 PM. |
|
|
|
|
10-03-2003, 06:13 PM
|
#6 |
|
Negative Camber
Join Date: May 2003
Location: Clearwater,Fla
Posts: 117
|
a fellow caddy owner
 ,i got a 64 sedan and a 64 coupe,have you tried jason edge,he has tons of 63-64 parts,and are you part of the 63-64 caddy community? its a place kinda like this,you got any pics of your ride? heres a pic of mine from a few yrs ago
__________________
68 c20 64 cadillac coupe deville 64 cadillac sedan deville two 84 50th anniversary nissan 300zx tubos 98 S-10 ex-cab,my 4 cyl daily driver |
|
|
|
|
10-03-2003, 11:53 PM
|
#7 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
I'm glad you got the help you were looking for. In reality, i really don't know much about the caddy cars.
|
|
|
|
|
10-04-2003, 12:28 AM
|
#8 |
|
Registered User
Join Date: Jan 2002
Location: Sahuarita, AZ USA
Posts: 2,033
|
Is yours a 2 door, 4 door? help me here.........I have a friend with a GM only salvage yard, deals in nothing newer that 1980. Tell me the exact make, model etc and I'll see if I can find your stuff.
__________________
Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com |
|
|
|
|
10-04-2003, 12:52 AM
|
#9 |
|
Registered User
Join Date: Oct 2001
Location: Grapevine, Tx.
Posts: 2,142
|
biglou55
There is a guy in Justin Texas that has a Caddilac only salvage yard. The name of the place is Honest John's Caddy Corner. He grew up in Grapevine as the son of a Funeral director and has always driven Caddilacs. Here is a link to his web-site. Honest John's My neighbor sells whosale GM parts to him which he re-boxes and sells all around the world.
__________________
John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS |
|
|
|
10-06-2003, 07:24 AM
|
#10 |
|
Senior Member
Join Date: Sep 2002
Location: Greenfield Mass.
Posts: 551
|
bigblack68 does jason edge have a web site what is the web site for the 63-64 club that is where i should take this post. hutch I have tried to get into honest John,s site for the last two months it keeps telling me there is a server error on his end. busterwivell it is a two doorthe only number i can find is on the drivers door jamb. 63go67109, thanks lou
__________________
Certifiably crazy person |
|
|
|
|
10-06-2003, 07:46 PM
|
#11 |
|
Negative Camber
Join Date: May 2003
Location: Clearwater,Fla
Posts: 117
|
Jasons site is 1964cadillac.com,he has a link to the site i think,he should have every thing you need
__________________
68 c20 64 cadillac coupe deville 64 cadillac sedan deville two 84 50th anniversary nissan 300zx tubos 98 S-10 ex-cab,my 4 cyl daily driver |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
