|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
09-01-2016, 12:03 AM
|
#1 |
|
Registered User
Join Date: Apr 2016
Location: Fort Bragg
Posts: 8
|
Robyn's '76 "steering box"
Does anyone know if a 1980 steering box will fit a '76? In the pics they look nearly identical.
The local parts house can only find an '80. Please let me know ASAP, I need to order so I can get it Friday. |
|
|
|
09-01-2016, 02:30 PM
|
#2 |
|
Registered User
Join Date: Oct 2015
Location: Waskatenau, Alberta
Posts: 259
|
Re: Robyn's '76 "steering box"
Yes, I believe you should have no problem. I'm not positive, but you may run into problems between 3/4 ton -1/2 ton steering boxes. But 1/2 to 1/2 should be okay. I once installed a steering box from a 78 onto a 72 without much trouble.
|
|
|
|
|
09-01-2016, 02:41 PM
|
#3 |
|
Registered User
Join Date: Sep 2009
Location: Clinton, ut
Posts: 63
|
Re: Robyn's '76 "steering box"
can't remember off the top of my head but they changed to metric fittings about that time so check that out. Someone will sound in on that.
|
|
|
|
|
09-01-2016, 11:50 PM
|
#4 |
|
Registered User
Join Date: Mar 2008
Location: red deer alberta
Posts: 777
|
Re: Robyn's '76 "steering box"
Correct...80 up used metric/O ring fittings
Other than adapting the hose all will fit (2wd and 4 wd are different) |
|
|
|
|
09-04-2016, 12:08 AM
|
#5 |
|
Registered User
Join Date: Apr 2016
Location: Fort Bragg
Posts: 8
|
Re: Robyn's '76 "steering box"
Thank you for your replies about the steering box. I got a remanufactured one that did NOT have the Poppet valve installed is that normal? The kid at the parts house was at a loss when I asked him. Must not have been his department.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
