![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: May 2016
Location: Pa
Posts: 1,278
|
Need Trim Hole measurements
I'm in need of door and fender trim hole measurements.
I can't find any info on location and spacing of upper and lower trim holes for doors and fenders. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! lol, please! Rich
__________________
IT IS WHAT IT IS |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2011
Location: Spokane WA
Posts: 198
|
Re: Need Trim Hole measurements
I don't think I have the exact trim pieces you need, but I can give you another measurement to work off of. I just so happen to have a piece off right now. Not sure if it would help or not.
__________________
USCG "Support Search & Rescue, Get Lost" |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() ![]() Join Date: Feb 2009
Location: Northern Nevada
Posts: 7,385
|
Re: Need Trim Hole measurements
Good luck with that. You could use an assembly manual, but the reference points won't help you, at least not as intended, because you don't know what they measured from. If you can locate one or two holes top and bottom, then you can use the manual and your eyes to do the rest. Here's some info.
https://www.youtube.com/watch?v=5JQYAEa0OGw http://67-72chevytrucks.com/vboard/s...d.php?t=678671 http://67-72chevytrucks.com/vboard/s...21#post1971021 http://67-72chevytrucks.com/vboard/s...d.php?t=672793 http://67-72chevytrucks.com/vboard/s...d.php?t=612113 http://67-72chevytrucks.com/vboard/s...d.php?t=665133 http://67-72chevytrucks.com/vboard/s...d.php?t=179279
__________________
Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly guide (kit) for restoring this truck from the ground up, complete with details including full hardware descriptions. Much of the info. applies to all 67-72 GM. My build thread, with some info. about the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025 |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2011
Location: Spokane WA
Posts: 198
|
Re: Need Trim Hole measurements
Well there ya go. Just needed to keep the post alive long enough for someone to come through with some useful info. Good luck with that trim...
__________________
USCG "Support Search & Rescue, Get Lost" |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2016
Location: Pa
Posts: 1,278
|
Re: Need Trim Hole measurements
Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
__________________
IT IS WHAT IT IS |
![]() |
![]() |
![]() |
Bookmarks |
|
|