Strangest engine swap? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsmarr1982 · 11-05-2016, 01:10 PM

What's the strangest engine swap in a 67-72? We have all seen ls's and cummins what else have people done?

davepl · 11-05-2016, 01:26 PM

I've seen a Cat engine in my old hometown. Never got a look at it up close, could just be like a big Cummins engine.

Coley · 11-05-2016, 01:51 PM

I recall seeing a pic of guy who appeared to have mounted a radial aircraft engine in one....I think....and although I don't know if it was functional.... it looked very cool.

Coley

**57taskforce** · 11-05-2016, 02:32 PM

I've seen 348s and 409s although not a strange swap it's kind of out of the box. I've always loved how those old bigblocks looked personally.

hamjet · 11-06-2016, 07:14 AM

Quote:

Originally Posted by 57taskforce

I've seen 348s and 409s although not a strange swap it's kind of out of the box. I've always loved how those old bigblocks looked personally.

I'm quite attached to this swap also...

birdkilla2k1 · 11-06-2016, 01:25 PM

It's not one that I've seen, but I'd kinda like to swap out the 292 for a 2JZ from a Supra...

**57taskforce** · 11-06-2016, 02:14 PM

Quote:

Originally Posted by hamjet

I'm quite attached to this swap also...

That is a beatiful sight to eyes! Such a classy looking hunk of iron!

hamjet · 11-06-2016, 04:23 PM

Quote:

Originally Posted by 57taskforce

That is a beatiful sight to eyes! Such a classy looking hunk of iron!

Thank you!

ratty69 · 11-06-2016, 09:45 PM

Quote:

Originally Posted by 57taskforce

such a classy looking hunk of iron!

x2!

Coley · 01-06-2017, 12:55 PM

Quote:

Originally Posted by hamjet

I'm quite attached to this swap also...

That simply has to be one of, if not the coolest engine swap I've seen.
Very classic and importantly....not very common (hence the unique/cool factor).

What is the 348 like for power and torque?...say compared to a 350?

All Good
Coley

hamjet · 01-06-2017, 01:45 PM

Quote:

Originally Posted by Coley

That simply has to be one of, if not the coolest engine swap I've seen.
Very classic and importantly....not very common (hence the unique/cool factor).

What is the 348 like for power and torque?...say compared to a 350?

All Good
Coley

Hi Coley, it's 280 HP at 4800 RPM, torque is 355 at 3200 RPM. 9.5/1 compression. STROKE IS 3.25, BORE IS 4.125, this is with the 3-2 bbls. I have it bored 30 over and a little more cam than stock specs so maybe closer to 300 HP. I've never pushed it passed 3500 RPM though, since it's just a daily driver and for looks. It's no racer by any means, it's all they had back in the late 50s early 60s before they came out with the real bbc. But I like to be different. LOL

Coley · 01-09-2017, 07:06 PM

Quote:

Originally Posted by hamjet

Hi Coley, it's 280 HP at 4800 RPM, torque is 355 at 3200 RPM. 9.5/1 compression. STROKE IS 3.25, BORE IS 4.125, this is with the 3-2 bbls. I have it bored 30 over and a little more cam than stock specs so maybe closer to 300 HP. I've never pushed it passed 3500 RPM though, since it's just a daily driver and for looks. It's no racer by any means, it's all they had back in the late 50s early 60s before they came out with the real bbc. But I like to be different. LOL

...well that would undoubtedly outpace my fairly stock 350 I'm sure.
Regardless, there is always only so much power you can safely put down under most circumstances but I'm quite sure it has the ability to hustle off the line.
...and I definitely like the 'different' factor in that.

I think one of my favorite swaps would be to a 472 or 500 c.i Cadillac (in lieu of a 409) but with a 4 speed (newer series) automatic behind it....although that is currently not in this years budget forecast...lol.

All good
Coley

**Steeveedee** · 01-10-2017, 12:14 AM

Quote:

Originally Posted by hamjet

Hi Coley, it's 280 HP at 4800 RPM, torque is 355 at 3200 RPM. 9.5/1 compression. STROKE IS 3.25, BORE IS 4.125, this is with the 3-2 bbls. I have it bored 30 over and a little more cam than stock specs so maybe closer to 300 HP. I've never pushed it passed 3500 RPM though, since it's just a daily driver and for looks. It's no racer by any means, it's all they had back in the late 50s early 60s before they came out with the real bbc. But I like to be different. LOL

I used to run those 348s pretty hard, back in the day (I used to work for some Chevy dealers then), but I can understand keeping the revs down so that it doesn't break. That is one COOL looking setup! One dealership I worked at had a '32 Chevy coupe as a trade in that had 6 Stromberg 97s on it. Pretty damn cool, too.

dirtyjim · 11-05-2016, 05:22 PM

I've seen a blazer with a jag straight 6 and a c10 with a 2jz that I still kick myself for not buying

**'68OrangeSunshine** · 11-06-2016, 05:59 PM

Quote:

Originally Posted by dirtyjim

I've seen a blazer with a jag straight 6 and a c10 with a 2jz that I still kick myself for not buying

A Jag six! That's funny. When my Dad had a '59 Mark IX saloon, all I heard was "you should put an SBC in it."

Eddie H. · 11-05-2016, 06:26 PM

Here's a 68 GMC with a T50 turbine in it

https://www.youtube.com/watch?v=oR7NiZmxVAo

cypressbog · 11-05-2016, 07:02 PM

An old board member had a Cadillac big block in his.

**kwmech** · 01-31-2018, 11:20 AM

Quote:

Originally Posted by Eddie H.

Here's a 68 GMC with a T50 turbine in it

https://www.youtube.com/watch?v=oR7NiZmxVAo

He lives about 6 miles down the road from. Shows it in the Auburn Car Show now and then

**LockDoc** · 11-05-2016, 09:13 PM

Quote:

Originally Posted by rsmarr1982

What's the strangest engine swap in a 67-72? We have all seen ls's and cummins what else have people done?

I guess it would have to be this one....

http://67-72chevytrucks.com/vboard/s...d.php?t=594835

LockDoc

**Steeveedee** · 11-05-2016, 09:56 PM

Not too weird, but I know of one truck with a Buick engine, and another case where a guy is looking to put a Buick engine in his truck, too. Given the cost of building Buick Vs Chevy (at least double, just for stock), I went the other way and put a Chevy engine in my Buick. I've since sold it, not long after I went back to Buick power for cheap- bought a car with a rebuilt engine and parted the rest out for a profit. Now the only old vehicle I have is the truck, and that's enough of a money pit. I don't need two pits.

**Boog** · 11-05-2016, 11:14 PM

Just this past week I saw a member here has a late model hemi in his c10.

lowrollin70gmc · 11-06-2016, 08:39 PM

When I bought my Burb it had a 478 ci V6 GMC Toroflow diesel from a 2 1/2 ton truck. Definitely a little odd, but it ran well until I swapped a Cummins in it.

**Bob B.** · 01-02-2017, 03:29 PM

Quote:

Originally Posted by lowrollin70gmc

When I bought my Burb it had a 478 ci V6 GMC Toroflow diesel from a 2 1/2 ton truck. Definitely a little odd, but it ran well until I swapped a Cummins in it.

Seen that one done a few times, a Toro-Flow has the same bell housing bolt pattern and motor mount location as the GMC V-6, so it's almost a bolt-in.

Read a story about a guy back in the day that had a new '67 GMC 2500 with a dealer-swap 478 Toro-Flow in it.

swamp rat · 11-06-2016, 11:10 PM

While I love the flat head, i'm kinda partial to this one!

https://www.youtube.com/watch?v=K_MwEFJA_xY

coreyjhen · 11-07-2016, 10:23 AM

My wife's grandfather burned up the six in his '69. He had a wrecked Studebaker with a V8 that was running when the accident happened out in the barn. Since he had a welding torch and some angle iron laying around, why not? I wish I had pictures.

11-05-2016, 01:10 PM	#1
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Strangest engine swap? What's the strangest engine swap in a 67-72? We have all seen ls's and cummins what else have people done? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

11-05-2016, 01:26 PM	#2
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,334	Re: Strangest engine swap? I've seen a Cat engine in my old hometown. Never got a look at it up close, could just be like a big Cummins engine. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

11-05-2016, 01:51 PM	#3
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Strangest engine swap? I recall seeing a pic of guy who appeared to have mounted a radial aircraft engine in one....I think....and although I don't know if it was functional.... it looked very cool. Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

11-05-2016, 02:32 PM	#4
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,518	Re: Strangest engine swap? I've seen 348s and 409s although not a strange swap it's kind of out of the box. I've always loved how those old bigblocks looked personally. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

11-06-2016, 01:25 PM	#6
birdkilla2k1 Registered User Join Date: May 2015 Location: Shapleigh, Maine Posts: 18	Re: Strangest engine swap? It's not one that I've seen, but I'd kinda like to swap out the 292 for a 2JZ from a Supra... __________________ 1967 C20 - "Ye Olde Farme Trucke" - 292, SM420...manual Powerglide with double low

11-05-2016, 05:22 PM	#14
dirtyjim Registered User Join Date: Feb 2013 Location: alvin, texas Posts: 622	Re: Strangest engine swap? I've seen a blazer with a jag straight 6 and a c10 with a 2jz that I still kick myself for not buying __________________ 1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus

11-05-2016, 06:26 PM	#16
Eddie H. Registered User Join Date: Mar 2001 Location: Paradise TX USA Posts: 1,200	Re: Strangest engine swap? Here's a 68 GMC with a T50 turbine in it https://www.youtube.com/watch?v=oR7NiZmxVAo __________________ "Negative people always seem to have a problem for every solution"

11-05-2016, 07:02 PM	#17
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Strangest engine swap? An old board member had a Cadillac big block in his.

11-05-2016, 09:56 PM	#20
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,790	Re: Strangest engine swap? Not too weird, but I know of one truck with a Buick engine, and another case where a guy is looking to put a Buick engine in his truck, too. Given the cost of building Buick Vs Chevy (at least double, just for stock), I went the other way and put a Chevy engine in my Buick. I've since sold it, not long after I went back to Buick power for cheap- bought a car with a rebuilt engine and parted the rest out for a profit. Now the only old vehicle I have is the truck, and that's enough of a money pit. I don't need two pits. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

11-05-2016, 11:14 PM	#21
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,568	Re: Strangest engine swap? Just this past week I saw a member here has a late model hemi in his c10. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

11-06-2016, 08:39 PM	#22
lowrollin70gmc Too many projects Join Date: Mar 2004 Location: Fargo, ND land of the flat hills Posts: 1,147	Re: Strangest engine swap? When I bought my Burb it had a 478 ci V6 GMC Toroflow diesel from a 2 1/2 ton truck. Definitely a little odd, but it ran well until I swapped a Cummins in it. __________________ Andrew 84 GMC C1500 SWB 6.2 Diesel/700R4/3.42 "Grandpa's odd duck" 70 GMC C1500 LWB My first truck: shaved, bagged, and more: the lowrollin70gmc 68 K20 Suburban 12V Cummins/NV5600/NP205/D60/11.5AAM 3.73s "Dakota Cadillac" 63 Chevy II Nova Coupe 250 I6/T56/4.56s "Economy car" 53 Willys Wagon 350/NV4500/BW4401/HP D44/9inch “Winter Wagon” 30 Model A 16 Focus ST

11-06-2016, 11:10 PM	#24
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: Strangest engine swap? While I love the flat head, i'm kinda partial to this one! https://www.youtube.com/watch?v=K_MwEFJA_xY __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

11-07-2016, 10:23 AM	#25
coreyjhen Registered User Join Date: Nov 2016 Location: Albuquerque, NM Posts: 110	Re: Strangest engine swap? My wife's grandfather burned up the six in his '69. He had a wrecked Studebaker with a V8 that was running when the accident happened out in the barn. Since he had a welding torch and some angle iron laying around, why not? I wish I had pictures.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.